- document
-
van Heijst, S.E. (author)Two-dimensional (2D) layered materials have attracted the interest of the scientific community following the discovery of graphene and its extraordinary properties. Of particular interest is a class of materials called transition metal dichalcogenides (TMDs). The materials within this class were discovered to show similarly...doctoral thesis 2024
- document
-
Ali Mubarak, Faisal (author), Mascolo, V. (author), Hussain, Faizan (author), Rietveld, Gert (author)Closed-form solutions are presented for calculating the reflection coefficient with corresponding uncertainty of metrology-grade 3.5 mm air-dielectric coaxial transmission lines for use as reference standards in S-parameter measurements up to 33 GHz. The closed-form solutions allow the calculation of the sensitivity coefficients required for...journal article 2024
- document
-
Mohammed, Musaab A. A. (author), Mohamed, Ahmed (author), Szabó, Norbert P. (author), Alarifi, Saad S. (author), Abdelrady, Ahmed (author), Alao, Joseph Omeiza (author)The recent research aims to investigate the petrophysical and hydrogeological parameters of the Nubian aquifer system (NAS) in Northern Khartoum State, Sudan, using integrated geophysical methods, including surface electrical resistivity and geophysical well-logging. The Nubian aquifer is a transboundary regional aquifer that covers vast areas...journal article 2024
- document
-
Schneider, Mike (author), Couzinié, Jean Philippe (author), Shalabi, Amin (author), Ibrahimkhel, Farhad (author), Ferrari, A. (author), Körmann, F.H.W. (author), Laplanche, Guillaume (author)This work aims to predict the microstructure of recrystallized medium and high-entropy alloys (MEAs and HEAs) with a face-centered cubic structure, in particular the density of annealing twins and their thickness. Eight MEAs and five HEAs from the Cr-Mn-Fe-Co-Ni system are considered, which have been cast, homogenized, cold-worked and...journal article 2024
- document
-
Valiya Valappil, S. (author), Goosen, J.F.L. (author), Aragon, A.M. (author)Ultrasonic flowmeters face unique challenges since, in addition to withstanding high fluid pressures, they have to avoid crosstalk, which is the interaction of the signals traveling through the fluid and the solid pipe. To avoid the crosstalk, which leads to poor accuracy or complete loss of the required signal, we develop a mounting...journal article 2024
- document
-
Wang, G. (author), Bar, Daniel (author), Schreier, S. (author)This study examines the potential of a new type of floating seawall, made up of retired large-scale oceangoing vessels, to be used in open water and exposed coastal areas. The main objectives of the research are to assess the effectiveness of the floating seawall concept, to determine the contribution of the gap resonance to wave attenuation,...journal article 2024
- document
-
Fajardo, Sebastian (author), Zeekaf, Jelte (author), van Andel, Tinde (author), Maombe, Christabel (author), Nyambe, Terry (author), Mudenda, George (author), Aleo, A. (author), Kayuni, Martha Nchimunya (author), Langejans, G.H.J. (author)This study explores traditional adhesives using an ethnobiological approach within a multisocioecological context in Zambia. Through semi-structured interviews, videotaped demonstrations, and herbarium collections, we investigated the traditional adhesives people know and use, the flexibility of production processes, resource usage, and...journal article 2024
- document
-
Cimen, Cansu (author), Bathoorn, Erik (author), Loeve, A.J. (author), Fliss, Monika (author), Berends, Matthijs S. (author), Nagengast, Wouter B. (author), Hamprecht, Axel (author), Voss, Andreas (author), Lokate, Mariëtte (author)Contamination of duodenoscopes is a significant concern due to the transmission of multidrug-resistant organisms (MDROs) among patients who undergo endoscopic retrograde cholangiopancreatography (ERCP), resulting in outbreaks worldwide. In July 2020, it was determined that three different patients, all had undergone ERCP with the same...journal article 2024
- document
-
4D-STEM Nanoscale Strain Analysis in van der Waals Materials: Advancing beyond Planar ConfigurationsBolhuis, M. (author), van Heijst, S.E. (author), Sangers, J.J.M. (author), Conesa Boj, S. (author)Achieving nanoscale strain fields mapping in intricate van der Waals (vdW) nanostructures, like twisted flakes and nanorods, presents several challenges due to their complex geometry, small size, and sensitivity limitations. Understanding these strain fields is pivotal as they significantly influence the optoelectronic properties of vdW...journal article 2024
- document
-
Jonker, R. G. (author), AlYousif, A.Y. (author), Hofland, Bas (author), Antonini, A. (author), Zoon, Arthur (author), Smith, Gregory (author)This study treats a detached homogenous low-crested structure (HLCS) made of Cubipod concrete elements placed seaward of a vertical wall (forming a basin in between) to reduce overtopping. Assessing the complex hydrodynamics and effects of changing the geometry of such a system in relation to overtopping reduction is challenging. The...journal article 2024
- document
-
Wang, S. (author), Zong, Qihang (author), Yang, Huiru (author), Huang, Qianming (author), Ye, Huaiyu (author), French, P.J. (author)In recent years, flexible strain sensors based on metal cracks have garnered significant interest for their exceptional sensitivity. However, striking a balance between sensitivity and detection range remains a significant challenge, which often limits its wider application. Herein, we introduce an innovative laser transmission pyrolysis...conference paper 2024
- document
-
Kievits, A.J. (author), Duinkerken, B. H.Peter (author), Fermie, Job (author), Lane, R. (author), Giepmans, Ben N.G. (author), Hoogenboom, J.P. (author)Recent advances in electron microscopy techniques have led to a significant scale up in volumetric imaging of biological tissue. The throughput of electron microscopes, however, remains a limiting factor for the volume that can be imaged in high resolution within reasonable time. Faster detection methods will improve throughput. Here, we have...journal article 2024
- document
-
Zuidema, W. (author)In this thesis, the design and engineering considerations for a multi-beam scanning electron microscope (MBSEM) are discussed. This microscope can benefit biological research in various ways. It can give new insights into the inner workings of a multitude of biological systems that were hard to get using previously existing instrumentation. For...doctoral thesis 2023
- document
-
Amoozandeh, A. (author)Industrial passive exoskeletons have been developed for years as a tool to reduce the physical workload of their users. They accomplish this by compensating for the user’s body weight and decreasing fatigue caused by repetitive loads. Despite their advantages, current exoskeletons have drawbacks that make them less convenient for users and thus...doctoral thesis 2023
- document
-
Yang, Zhe (author), Liu, Zhou (author), Zhang, Qi (author), Chen, Zhe (author), de Jesus Chavez, Jose (author), Popov, M. (author)The traditional fault control strategy of converter-interfaced renewable energy sources (CIRESs) may bring about a lower sensitivity level or misoperation of fault component-based directional elements. To overcome this problem, a new control scheme is proposed to adjust sequence impedance angles of CIRESs by computing suitable current...journal article 2023
- document
-
Moradi Sepahvand, M. (author), Amraee, Turaj (author)This paper presents a multi-stage expansion model for the co-planning of transmission lines, battery energy storage (ES), and wind power plants (WPP). High penetration of renewable energy sources (RES) is integrated into the proposed model concerning renewable portfolio standard (RPS) policy goals. The possibility of bundling existing...journal article 2023
- document
-
Lindeman, Pim (author), Steijlen, A.S.M. (author), Bastemeijer, J. (author), Bossche, A. (author)One of the major challenges associated with e-textiles is the connection between flexible fabric-integrated wires and rigid electronics. This work aims to increase the user experience and mechanical reliability of these connections by foregoing conventional galvanic connections in favor of inductively coupled coils. The new design allows for...journal article 2023
- document
-
Nutter, John (author), Qi, Jiahui (author), Farahani, H. (author), Rainforth, W. Mark (author), van der Zwaag, S. (author)The current study reports in situ TEM observations of the growth of bainitic ferrite in an Fe-0.3C-3Mn-1.5Si-0.15Mo steel held isothermally at 300 °C with a higher spatio-temporal resolution than in previous studies. Significant variations were found in the lengthening rate, with the highest being in excess of 30,000 nm.s<sup>−1</sup> while...journal article 2023
- document
-
Çelik, F.T. (author), Joof, Sulayman (author), Karacuha, Kamil (author)The present study proposes a dual-polarized bandwidth-enhanced filtering specialized dipole antenna design for 5G by employing a wide printed dipole, filtering resonators, a reflector surface, and specially designed balun structures. Such a configuration is commonly deployed in conventional base stations. To increase the antenna impedance and...journal article 2023
- document
-
Sparnaaij, M. (author), Yuan, Y. (author), Daamen, W. (author), Duives, D.C. (author)The Covid-19 pandemic has had a large impact on the world. The virus spreads especially easily among people in indoor spaces such as restaurants. Hence, tools that can assess how different restaurant settings can impact the potential spread of an airborne virus and that can assess the effectiveness of mitigation policies are of high value....journal article 2023