Searched for: subject%3A%22healing%22
(1 - 20 of 54)

Pages

document
Wan, Z. (author), Xu, Y. (author), Chang, Z. (author), Liang, M. (author), Šavija, B. (author)
Vascular self-healing concrete (SHC) has great potential to mitigate the environmental impact of the construction industry by increasing the durability of structures. Designing concrete with high initial mechanical properties by searching a specific arrangement of vascular structure is of great importance. Herein, an automatic optimization...
journal article 2024
document
Hussein, Abdelrahman (author), van der Zwaag, S. (author), Kim, Byungki (author)
In recent years, a new class of super saturated binary and ternary alloys have demonstrated the ability for the self-healing of creep-induced voids formed at the grain boundaries. However, a clear understanding of the parameters affecting the self-healing mechanism is still not yet complete. One of the main challenges is understanding the...
journal article 2024
document
Wan, Z. (author)
Self-healing concrete has great potential to enhance the durability of concrete structures without significantly increasing the initial costs. Among the self-healing approaches, vascular self-healing cementitious composite is capable of supplying healing agents to the cracked region in a continuous way or multiple times. However, the use of...
doctoral thesis 2023
document
Wan, Z. (author), Chang, Z. (author), Xu, Y. (author), Šavija, B. (author)
In this paper, optimization of vascular structure of self-healing concrete is performed with deep neural network (DNN). An input representation method is proposed to effectively represent the concrete beams with 6 round pores in the middle span as well as benefit the optimization process. To investigate the feasibility of using DNN for...
journal article 2023
document
Wu, Wentao (author), Chu, Liangyong (author), Garcia, Santiago J. (author), van der Zwaag, S. (author), Li, Ming (author), Shen, Liming (author), Bao, Ningzhong (author)
In this paper, graphene oxide (GO) modified microcapsules have been developed for use in self-healing Cardanol-based epoxy anti-corrosion coatings on steel substrates. The microcapsules had a polymethyl methacrylate (PMMA) shell, covered with aminated GO flakes and contained either of the two complementary healing agents mixed with nanosized...
journal article 2023
document
Wan, Z. (author), Xu, Y. (author), He, S. (author), Chen, Y. (author), Xie, J. (author), Šavija, B. (author)
Direct ink writing of cementitious materials can be an alternative way for creating vascular self-healing concrete by intentionally incorporating hollow channels in the cementitious matrix. In this study, a 3D-printable fibre reinforced mortar was first developed. Three groups of specimens were fabricated using direct ink writing, where the...
journal article 2023
document
Sayadi, Sina (author), Chang, Z. (author), He, S. (author), Schlangen, E. (author), Mihai, I.C. (author), Jefferson, Anthony (author)
This paper describes the development of a discrete lattice model for simulating structures formed from self-healing cementitious materials. In particular, a new approach is presented for simulating time dependent mechanical healing in lattice elements. The proposed formulation is designed to simulate the transient damage and healing behaviour...
journal article 2023
document
He, S. (author), Wan, Z. (author), Chen, Y. (author), Jonkers, H.M. (author), Schlangen, E. (author)
The current study investigates short-term and long-term crack-healing behaviour of mortars embedded with bacteria-based poly-lactic acid (PLA) capsules under both ideal and realistic environmental conditions. Two sets of specimens were prepared and subjected to different healing regimes, with the first set kept in a mist room for varying...
journal article 2023
document
Zhao, J. (author), Santoso, A. (author), Garcia, Santiago J. (author)
The interaction of 2,5-dimercapto-1,3,4-thiadiazole (DMTD) with the AA2024-T3 local microstructure (S-phase, secondary phases and matrix) as function of the NaCl concentration is studied. The inhibiting power and the local interaction of DMTD with the metal were studied by in–situ opto-electrochemistry, XPS and Raman spectroscopy. The...
journal article 2023
document
Al-Obaidi, S.M.J. (author), He, S. (author), Schlangen, E. (author), Ferrara, Liberato (author)
This study investigates the bond-slip behavior of micro steel fibers embedded into an Ultra-High-Performance Concrete (UHPC) matrix as affected by the self-healing of the same matrix in different exposure conditions. The UHPC matrix contains a crystalline admixture as a promoter of the autogenous self-healing specially added to enhance the...
journal article 2023
document
Gaggero, M.B. (author), Korswagen, Paul A. (author), Esposito, R. (author), Rots, J.G. (author)
Cracks are one of the most common expressions of damage in masonry structures. Aside from aesthetic issues, they can compromise the overall behaviour of the structure; therefore, they are undesirable and need to be repaired. The repointing technique is traditionally implemented in this context, especially in historical masonry. Nevertheless,...
book chapter 2023
document
Rossi, E. (author), Rahul, R. (author), Copuroglu, Oguzhan (author), Jonkers, H.M. (author)
The possible beneficial impact of self-healing on chloride transport through cracks has been assessed for two bacteria-based self-healing mortar mixtures in comparison with Ordinary Portland cement mortar. Intact self-healing specimens featured lower chloride transport coefficients thanks to a denser microstructure and to the formation of a...
journal article 2022
document
Tomić, Nataša Z. (author), Saeedifar, M. (author), Saleh, M. (author), Marinković, Aleksandar (author), Zarouchas, D. (author), Teixeira De Freitas, S. (author)
The aim of this research was to investigate the self-healing potential of damaged Al joints when bonded using novel eco-epoxide adhesives derived from tannic acid (TA). Two eco-epoxy components based on TA, (A) glycidyl ether and (B) glycidyl phosphate ester of TA, were produced. The effect of the eco-epoxy components on the self-healing...
journal article 2022
document
Mousavi Rad, Sina (author), Kamboozia, Neda (author), Anupam, K. (author), Saed, Seyed Ataollah (author)
First, porous asphalt (PA) pavement possesses a lower strength and lifetime compared to typical dense-grade asphalt mixtures due to its large empty space structure. Second, PA pavements' fatigue life and durability are affected significantly by climate factors; the two most critical factors being aging conditions and moisture actions. Third,...
journal article 2022
document
Gao, Jian (author), Jin, Peng (author), Zhang, Yuze (author), Dong, H. (author), Wang, Ruixing (author)
Due to low activity or long mineralization time, traditional mineral agents for self-healing concrete generally need a long time to achieve a desired repair efficiency. Inspired by epoxy resin AB glue which can consolidate in a short time when mixing the two components together, a novel type of fast-responsive capsules based on two soluble...
journal article 2022
document
He, S. (author), Zhang, Shizhe (author), Lukovic, M. (author), Schlangen, E. (author)
Strain hardening cementitious composite (SHCC) is a special class of ultra-ductile material which has autogenous self-healing capability due to its intrinsic tight crack widths. To further improve its healing ability, healing agent (HA) can be incorporated in SHCC, enabling it also the autonomous self-healing mechanism. In this study, the...
journal article 2022
document
Fu, Y. (author), Fang, H. (author), Monaco, F. (author), Cloetens, P. (author), Tichelaar, F.D. (author), van Meel, J.G. (author), Brück, E.H. (author), van der Zwaag, S. (author), van Dijk, N.H. (author)
Constant stress creep experiments at 550 °C were performed on a high-purity Fe-3Au-4W (wt.%) ternary alloy with about 1 at.% supersaturation for Au and W in order to study self healing of grain-boundary cavities by both Au-rich and W-rich precipitates. Using synchrotron X-ray nano-tomography, the development of the creep cavities and the...
journal article 2022
document
Fan, B. (author)
This thesis describes the experimental development of new dynamic hydrogels based on reversible thiol conjugate additions. Redox-controlled hydrogels and self-healing injectable hydrogels have been achieved by introducing reversible thiol conjugate additions to crosslink polymers, leading to hydrogel formation. The overall objective in this...
doctoral thesis 2021
document
Montano, V. (author)
The work exposed in this thesis addresses two main scientific challenges in the field of intrinsic self-healing polymers that limit the translation of the academic research efforts into commercial products, namely: i) the implementation of the self-healing functionality in polymer commodities by minimal chemical modifications; and ii) the...
doctoral thesis 2021
document
Tomić, Nataša Z. (author), Saleh, M. (author), Saeedifar, M. (author), Marinković, Aleksandar (author), Teixeira De Freitas, S. (author)
The aim of this paper is to study the self-healing capability of fractured Al joints bonded with novel eco-epoxide adhesives synthesized from a bio-renewable raw material (tannic acid – TA). Two synthesized eco-epoxy components based on TA, (A) glycidyl ether and (B) glycidyl phosphate ester of TA, were used as a replacement for the toxic epoxy...
journal article 2021
Searched for: subject%3A%22healing%22
(1 - 20 of 54)

Pages