Velocity and water-layer thickness of overtopping flows on sea dikes
Report of measurements and formulas development
More Info
expand_more
Abstract
The study aims to establish a set of formulas estimating velocity and depth of overtopping flows at sea dikes including seaward-side slope, crest and landward-side slope. These formulas are applicable to flows which are generated by natural waves and the simulator giving associated characteristics of any arbitrary value of exceedance probability. Note that the probability is based on the total number of incident waves and not to be confused with the total number of overtopping events. The difference between the fictitious wave run-up level and the crest level (Ru2% - Rc) is widely considered as a measure of the (potential) energy of wave overtopping. This term is therefore used to estimate values of the mean overtopping discharges, ow velocities, water-layer thickness and overtopping volumes. In line with many existing research works and guidelines, the potential term is crucial to derive other parameters. Experimental data of Van Gent [2002] is reanalyzed with a slightly different perspective to achieve the study objective. The analysis procedure basically consists of three main steps: from wave conditions and dike cross-section to calculate wave run-up levels; from wave run-up levels to estimate flow parameters on the dike crest; from flow parameters on the dike crest to further compute the corresponding parameters on the landward slope. The obtained equations are verified with flow measurements of the simulator on real dike slopes. Consequently, feasible values representing the roughness of different grass coverings are determined.