Estimating the true piezoelectric properties of BiFeO₃ from measurements on BiFeO₃-PVDF terpolymer composites

Estimating the true piezoelectric properties of BiFeO₃ from measurements on BiFeO₃-PVDF terpolymer composites

Tuluk, A. (TU Delft Novel Aerospace Materials)
Mahon, T.R. (TU Delft Novel Aerospace Materials)
van der Zwaag, S. (TU Delft Novel Aerospace Materials)
Groen, W.A. (TU Delft Aerospace Structures & Materials)

Aerospace Structures & Materials

2021

BiFeO₃ is an interesting multiferroic material with potential use in sensors and transducers. However, the high coercive field and low dielectric strength of this material make the poling process extremely difficult. Poling becomes a lot easier if the ceramic particles are incorporated in a non-conductive polymer with comparable dielectric properties. In this work, unstructured composites consisting of BiFeO₃ particles in a non-piezoactive PVDF terpolymer matrix are made with a ceramic volume fraction ranging from 20% to 60%. The highest piezoelectric charge and voltage constant values (d₃₃ = 31 pC/N and g₃₃ = 47 mV m/N) are obtained for a BiFeO₃-PVDF terpolymer composite with a volume fraction of 60%. The Poon model is chosen to analyse the volume fraction dependence of the dielectric constant while the modified Yamada model is used to analyse the piezoelectric charge constant data. It is concluded that the maximum possible piezoelectric constant for bulk BiFeO₃ can be as high as 56 pC/N.

BiFeO
Bismuth Ferrite
Dielectric
Piezoelectricity
Polymer composites
PVDF

http://resolver.tudelft.nl/uuid:5db53c78-aca9-4237-8717-4b7cf9685819

https://doi.org/10.1016/j.jallcom.2021.159186

0925-8388

Journal of Alloys and Compounds, 868

Institutional Repository

journal article

© 2021 A. Tuluk, T.R. Mahon, S. van der Zwaag, W.A. Groen