Numerical analysis of train-track-subgrade dynamic performance with crumb rubber in ballast layer

Numerical analysis of train-track-subgrade dynamic performance with crumb rubber in ballast layer

Guo, Y. (TU Delft Railway Engineering)
Shi, Can (Southwest Jiaotong University; Shenzhen University)
Zhao, Chunfa (Southwest Jiaotong University)
Markine, V.L. (TU Delft Railway Engineering)
Jing, Guoqing (Beijing Jiaotong University)

2022

Crumb rubber (CR) has been proposed to apply in the ballast or sub-ballast layer for ballast degradation mitigation and vibration (noise) reduction. The CR can change the ballast layer stiffness, which can affect the train-track-subgrade dynamic performance and cause travel comfort and safety issues. Towards this, this study aims at confirming 1) how much the CR application can affect the dynamic performance of train and ballast layer; 2) to what extent the CR-ballast layer can distribute the train loadings to reduce subgrade surface stress. To achieve this aim, a whole train-track-subgrade system model was built by coupling multibody dynamics (MD), discrete element method (DEM) and finite difference method (FDM). The MD was used to build the train, including one vehicle body, two bogies and four wheelsets. The DEM was used to build the ballasted track, including rail, sleepers and ballast layer. The FDM was used to build the subgrade. Using the coupled model, the dynamic performance of train and track were studied, including the vehicle body acceleration, wheel-rail force, rail dynamical bending moment, sleeper acceleration, sleeper displacement and ballast acceleration. In addition, the energy dissipation of the ballast bed was also presented. For the subgrade, the subgrade surface acceleration and surface stress were measured and analysed. In the model, different CR size and percentage were considered. Results show that using the CR in ballast layer can increase the accelerations of sleeper, rail and train. But it can decrease the ballast degradation, subgrade surface acceleration and subgrade surface stress. CR helps consume train loading energy, reducing the energy that has to be consumed by ballast friction. Small size CR (8–22.4 mm) has greater influence on dynamic performance of the whole train-track-subgrade system than big size CR (9.5–63 mm). In summary, 10% percentage of CR-ballast mixture is recommended, and for CR size it is difficult to give a recommendation. Small size CR increase ballast acceleration more than big size CR, but small size CR are better at improving sleeper displacement, subgrade stress and ballast bed stress.

Ballast
CR
Crumb rubber
Discrete element method
Finite difference method
Multibody dynamics
Tire-derived aggregate

http://resolver.tudelft.nl/uuid:bfb4da6b-f345-44e5-9a08-f15b80797b1b

https://doi.org/10.1016/j.conbuildmat.2022.127559

0950-0618

Construction and Building Materials, 336, 1-14

Institutional Repository

journal article

© 2022 Y. Guo, Can Shi, Chunfa Zhao, V.L. Markine, Guoqing Jing