The adherence of clay to steel surfaces

Conference paper (2018)
Copyright: © 2018 André R. Zimnik, Lennart R. Van Baalen, P.N.W. Verhoef, D.J.M. Ngan-Tillard
More Info
expand_more

Published Date

01-01-2018

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

Recently the first full face tunnel boring machines were used in the Netherlands. Several problems have been encountered in tunnelling projects in the Dutch soft soils. One was the adherence of stiff clays to the TBM cutting wheel, mixing chamber and the pipelines, which transport the clay from the front. Adherence of clay can be described in terms of adhesion and adhesive friction. Parameters which influence these two factors are on one hand the mineralogy, texture, the (over)-consolidation ratio and composition of the clay and on the other hand the type of steel and the textural state and condition of the steel surface. To study the adherence of clay, two types of clays were tested. Tests have been performed on Speswhite, which consists mostly of kaolinite and on Boom clay, which is a mixture of quartz, illite and kaolinite. Samples were prepared from clay powders. The adherence behaviour of clay was investigated by measuring the shear stress required to shear the clay over a steel surface in a direct shearbox. Results show a great influence of the steel roughness, contact time and mineral type. This is in accordance with practical experience and previous literature. The shearbox test gives a good quantitative impression of the adhesive shear strength, however it is expected that other devices like the simple shearbox and the ring shearbox are better suited to study the parameter variation during the tests.