Accurate and rapid postearthquake structural damage assessment is of vital importance for humanitarian relief. Remote sensing techniques have the potential to map large areas with reduced data latency but are limited by several factors, including accuracy (compared to in-situ monitoring campaigns) and data acquisition frequency. Current damage assessment techniques relying on remote sensing data enable rapid assessment in situations where on-site reconnaissance is not possible or desirable. Yet, these techniques rely on different scales, measurement methods, and spatial resolutions, making it difficult to assimilate many different damage products in a homogeneous damage map. Here, we present the results of the U.K.'s Earthquake Engineering Field Investigation Team's remote-sensing-based reconnaissance mission, which was carried out in the aftermath of the series of earthquakes that struck Turkey and Syria in February 2023. We use a set of publicly available damage maps based on synthetic aperture radar, optical imaging, and ground-based reports as well as in-house developed damage products and assess their relative accuracies. We describe the process of supporting on-site reconnaissance planning by creating maps that describe the building stock and diversity of damage in southeast Turkey to assist field survey teams in selecting regions that represent a diverse sample of building typologies and damage levels. Our results show that satellite-based remote sensing damage maps disagree with each other, and extensive validation data are still required to characterize the accuracy of each method at both high and medium resolution. Finally, we provide recommendations for planning and validation of future earthquake response efforts.

Remote reconnaissance missions are promising solutions for the assessment of earthquake-induced structural damage and cascading geological hazards. Space-borne remote sensing can complement in-field missions when safety and accessibility concerns limit post-earthquake operations on the ground. However, the implementation of remote sensing techniques in post-disaster missions is limited by the lack of methods that combine different techniques and integrate them with field survey data. This paper presents a new approach for rapid post-earthquake building damage assessment and landslide mapping, based on Synthetic Aperture Radar (SAR) data. The proposed texture-based building damage classification approach exploits very high resolution post-earthquake SAR data integrated with building survey data. For landslide mapping, a backscatter intensity-based landslide detection approach, which also includes the separation between landslides and flooded areas, is combined with optical-based manual inventories. The approach was implemented during the joint Structural Extreme Event Reconnaissance, GeoHazards International and Earthquake Engineering Field Investigation Team mission that followed the 2021 Haiti Earthquake and Tropical Cyclone Grace.