The hybrid ML-FETI-DP algorithm combines the advantages of adaptive coarse spaces in domain decomposition methods and certain supervised machine learning techniques. Adaptive coarse spaces ensure robustness of highly scalable domain decomposition solvers, even for highly heterogeneous coefficient distributions with arbitrary coefficient jumps. However, their construction requires the setup and solution of local generalized eigenvalue problems, which is typically computationally expensive. The idea of ML-FETI-DP is to interpret the coefficient distribution as image data and predict whether an eigenvalue problem has to be solved or can be neglected while still maintaining robustness of the adaptive FETI-DP method. For this purpose, neural networks are used as image classifiers. In the present work, the ML-FETI-DP algorithm is extended to three dimensions, which requires both a complex data preprocessing procedure to construct consistent input data for the neural network as well as a representative training and validation data set to ensure generalization properties of the machine learning model. Numerical experiments for stationary diffusion and linear elasticity problems with realistic coefficient distributions show that a large number of eigenvalue problems can be saved; in the best case of the numerical results presented here, 97% of the eigenvalue problems can be avoided being set up and solved.@en

The convergence rate of classic domain decomposition methods in general deteriorates severely for large discontinuities in the coefficient functions of the considered partial differential equation. To retain the robustness for such highly heterogeneous problems, the coarse space can be enriched by additional coarse basis functions. These can be obtained by solving local generalized eigenvalue problems on subdomain edges. In order to reduce the number of eigenvalue problems and thus the computational cost, we use a neural network to predict the geometric location of critical edges, i.e., edges where the eigenvalue problem is indispensable. As input data for the neural network, we use function evaluations of the coefficient function within the two subdomains adjacent to an edge. In the present article, we examine the effect of computing the input data only in a neighborhood of the edge, i.e., on slabs next to the edge. We show numerical results for both the training data as well as for a concrete test problem in form of a microsection subsection for linear elasticity problems. We observe that computing the sampling points only in one half or one quarter of each subdomain still provides robust algorithms.@en

The course of an epidemic can often be successfully described mathematically using compartment models. These models result in a system of ordinary differential equations. Two well-known examples are the SIR and the SEIR models. The transition rates between the different compartments are defined by certain parameters that are specific for the respective virus. Often, these parameters are known from the literature or can be determined using statistics. However, the contact rate or the related effective reproduction number are in general not constant in time and thus cannot easily be determined. Here, a new machine learning approach based on physics-informed neural networks is presented that can learn the contact rate from given data for the dynamical systems given by the SIR and SEIR models. The new method generalizes an already known approach for the identification of constant parameters to the variable or time-dependent case. After introducing the new method, it is tested for synthetic data generated by the numerical solution of SIR and SEIR models. The case of exact and perturbed data is considered. In all cases, the contact rate can be learned very satisfactorily. Finally, the SEIR model in combination with physics-informed neural networks is used to learn the contact rate for COVID-19 data given by the course of the epidemic in Germany. The simulation of the number of infected individuals over the course of the epidemic, using the learned contact rate, shows a very promising accordance with the data. @en

Scientific machine learning (SciML), an area of research where techniques from machine learning and scientific computing are combined, has become of increasing importance and receives growing attention. Here, our focus is on a very specific area within SciML given by the combination of domain decomposition methods (DDMs) with machine learning techniques for the solution of partial differential equations. The aim of the present work is to make an attempt of providing a review of existing and also new approaches within this field as well as to present some known results in a unified framework; no claim of completeness is made. As a concrete example of machine learning enhanced DDMs, an approach is presented which uses neural networks to reduce the computational effort in adaptive DDMs while retaining their robustness. More precisely, deep neural networks are used to predict the geometric location of constraints which are needed to define a robust coarse space. Additionally, two recently published deep domain decomposition approaches are presented in a unified framework. Both approaches use physics-constrained neural networks to replace the discretization and solution of the subdomain problems of a given decomposition of the computational domain. Finally, a brief overview is given of several further approaches which combine machine learning with ideas from DDMs to either increase the performance of already existing algorithms or to create completely new methods.@en

The convergence rate of domain decomposition methods is generally determined by the eigenvalues of the preconditioned system. For second-order elliptic partial differential equations, coefficient discontinuities with a large contrast can lead to a deterioration of the convergence rate. Only by implementing an appropriate coarse space, or second level, a robust domain decomposition method can be obtained. In this article, a new frugal coarse space for FETI-DP (Finite Element Tearing and Interconnecting-Dual Primal) and BDDC (Balancing Domain Decomposition by Constraints) methods is presented, which has a lower set-up cost than competing adaptive coarse spaces. In particular, in contrast to adaptive coarse spaces, it does not require the solution of any local generalized eigenvalue problems. The approach considered here aims at a low-dimensional approximation of the adaptive coarse space by using appropriate weighted averages, and it is robust for a broad range of coefficient distributions for diffusion and elasticity problems. However, in general, for completely arbitrary coefficient distributions with high contrast, some additional, adaptively chosen constraints are necessary in order to guarantee robustness. In this article, the robustness is heuristically justified as well as numerically shown for several coefficient distributions. The new coarse space is compared to adaptive coarse spaces, and parallel scalability up to 262 144 parallel cores for a parallel BDDC implementation with the new coarse space is shown. The superiority of the new coarse space over classic coarse spaces with respect to parallel weak scalability and time-to-solution is confirmed by numerical experiments. Since the new frugal coarse space is computationally inexpensive, it could serve as a new default coarse space, which, for very challenging coefficient distributions, could then still be enhanced by adaptively chosen constraints.@en

Domain decomposition methods are robust and parallel scalable, preconditioned iterative algorithms for the solution of the large linear systems arising in the discretization of elliptic partial differential equations by finite elements. The convergence rate of these methods is generally determined by the eigenvalues of the preconditioned system. For second-order elliptic partial differential equations, coefficient discontinuities with a large contrast can lead to a deterioration of the convergence rate. A remedy can be obtained by enhancing the coarse space with elements, which are often called constraints, that are computed by solving small eigenvalue problems on portions of the interface of the domain decomposition, i.e., edges in two dimensions or faces and edges in three dimensions. In the present work, without restriction of generality, the focus is on two dimensions. In general, it is difficult to predict where these constraints have to be added, and therefore the corresponding local eigenvalue problems have to be computed, i.e., on which edges. Here, a machine learning based strategy using neural networks is suggested to predict the geometric location of these edges in a preprocessing step. This reduces the number of eigenvalue problems that have to be solved before the iteration. Numerical experiments for model problems and realistic microsections using regular decompositions as well as decompositions from graph partitioners are provided, showing very promising results.@en

For complex model problems with coefficient or material distributions with large jumps along or across the domain decomposition interface, the convergence rate of classic domain decomposition methods for scalar elliptic problems usually deteriorates. In particular, the classic condition number bounds [1, 12] will depend on the contrast of the coefficient function. As a remedy, different adaptive coarse spaces, e.g. [4, 13], have been developed which are obtained by solving certain generalized eigenvalue problems on local parts of the interface, i.e., edges and/or faces.@en

The convergence rate of classical domain decomposition methods for diffusion or elasticity problems usually deteriorates when large coefficient jumps occur along or across the interface between subdomains. In fact, the constant in the classical condition number bounds [11, 12] will depend on the coefficient jump.@en