Hydraulic fracturing of coalbed methane wells has been widely practised as an effective method to increase drainage efficiency in low-permeability, low-pressure and low-saturated coal seams. To investigate hydraulic fracture performance and associated seismic response in coal, hydraulic fracturing experiments were carried out on two cubic coal blocks containing a host of natural fractures using a true triaxial rock testing machine equipped with loading, injection and acoustic systems. The acoustic system uses transducers with active sources to repetitively generate and receive ultrasonic P/S wave pulses for characterising mechanical properties of the coal blocks and revealing fracture growth. Silicon oil was injected into the middle of coal blocks to create hydraulic fractures under deviatoric stress conditions, and the stress and displacement, borehole pressure and volume, and seismic response were recorded over the injection process. X-ray computed tomography (CT) was conducted before and after the experiments to identify the location and geometry of hydraulic and natural fractures. Results have shown that the fracturing behaviour, the drawdown period of borehole pressure and the intrusion of fracturing fluid are dominated by the complexity and insulation offered by internal natural fracture networks of coal blocks. In addition, seismic spectrograms captured both fracture initiation and its subsequent interaction with natural fractures, which indicates that the induced fracture and fracturing fluid interfere with the propagation of seismic waves and influence ultrasonic seismic characteristics. Seismic velocity tomography of ultrasonic acoustic signals recorded also provided the spatial information of fractures, such as approximate locations of pre-existing fractures and injection-disturbed regions.

@en

Two 0.3 m × 0.3 m × 0.3 m shale blocks, one representing a homogeneous sample while the other representing a naturally fractured sample, are modelled using the lattice based DEM code, XSite. The synthetic rock mass approach (SRM), which assigns the smooth joint contacts (SJM) to the weakness planes, is used to represent the natural fractures in shale block-2. Firstly, the developed models are compared with the findings of previously conducted true-triaxial hydraulic fracturing experiments with acoustic measurements, and their subsequent computed tomography (CT) and seismic velocity tomography results. The 3D model results confirmed the curved shape hydraulic fractures, which propagated perpendicular to the minimum stress directions in both shale blocks. Model results also captured the natural fracture (NF) and hydraulic fracture (HF) interaction, particularly the arrest, the dilation of major NFs, followed by crossing with offset mechanism, in shale block-2. Secondly, the parametric studies are carried out to investigate the role of fluid flow rate (q), and fluid viscosity (µ) on different NF/HF interaction mechanisms. The effects of q and µ are discussed based on the total stimulated area including the tensile and shear microcracks, the pipe apertures, and the pressure evolutions within NFs.

@en

Two 0.3 m × 0.3 m × 0.3 m cubic blocks of shale and coal were used for hydraulic fracturing experiments under true tri-axial stress conditions. The shale block used was highly homogeneous and without visible fractures, while the coal block contained a host of natural fractures. The mechanical and hydraulic properties of both rocks were characterized through multi-stage triaxial tests, Brazilian disk tests, and porosity and permeability measurements. A true tri-axial rock testing machine equipped with loading, pump and acoustic systems was used in the experiment. The acoustic system uses 48 transducers with active sources to repetitively generate and receive ultrasonic P/S wave pulses to reveal fracture initiation and growth. Before the experiment, initial seismic response of both blocks was recorded under hydrostatic stress conditions to characterize anisotropy and heterogeneity of the blocks as reference. Silicon oil was injected centrally into both blocks to create a hydrofracture under deviatoric stress conditions and the load, displacement, pump pressure and volume, and seismic response during the injection process were recorded. Results from two blocks are being compared in terms of hydrofracture geometry and seismic features.@en