White rot fungi using P. sajor-caju and T. versicolor was examined to pretreat raw champost (lignin-rich) and oyster champost (cellulose-rich) for enhancement of fermentative volatile fatty acid (VFA) production. Results showed that the efficiency of pretreatment and VFA production was influenced by the fungal strains and substrates. P. sajor-caju pretreatment showed preferential lignin degradation on raw champost and obtained the maximum VFA yield (203 ± 9 mg COD/g VS_added), which increased by 60% and 74% compared to that of control and unpretreated champost, respectively. For cellulose-rich oyster champost, however, fungal pretreatment decreased VFA yield compared to unpretreated champost. Further mechanisms analysis demonstrated the two strains grow and secreted ligninolytic enzymes, which substantially influenced the characteristics of two champosts such as cellulose/lignin ratio and morphology in different extents. P. sajor-caju was highly efficient to lignin-rich champost on selectively degrading lignin and further enhancing digestibility such as VFA production.

In recent years, volatile fatty acid (VFA) production through anaerobic fermentation of sewage sludge, instead of methane production, has been regarded as a high-value and promising roadmap for sludge stabilization and resource recovery. This review first presents the effects of some essential factors that influence VFA production and composition. In the second part, we present an extensive analysis of conventional pretreatment and co-fermentation strategies ultimately addressed to improving VFA production and composition. Also, the effectiveness of these approaches is summarized in terms of sludge degradation, hydrolysis rate, and VFA production and composition. According to published studies, it is concluded that some pretreatments such as alkaline and thermal pretreatment are the most effective ways to enhance VFA production from sewage sludge. The possible reasons for the improvement of VFA production by different methods are also discussed. Finally, this review also highlights several current technical challenges and opportunities in VFA production with spectrum control, and further related research is proposed.