Achieving amplification with high gain and quantum-limited noise is a difficult problem to solve. Parametric amplification using a superconducting transmission line with high kinetic inductance is a promising technology not only to solve this problem but also adding several benefits. Compared with other technologies, they have the potential to improve power saturation, achieve larger fractional bandwidths, and operate at higher frequencies. In this type of amplifier, the selection of the proper transmission line is a key element in its design. Given current fabrication limitations, traditional lines, such as coplanar waveguides (CPW), are not ideal for this purpose, since it is difficult to make them with the proper characteristic impedance for good matching and slow enough phase velocity for making them more compact. Capacitively loaded lines, also known as artificial lines, are a good solution to this problem. However, few design rules or models have been presented to guide their accurate design. This fact is even more crucial considering that they are usually fabricated in the form of Floquet lines that have to be designed carefully to suppress undesired harmonics appearing in the parametric process. In this article we present, first, a new modeling strategy, based on the use of electromagnetic-simulation software, and, second, a first-principles model that facilitate and speed the design of CPW artificial lines and of Floquet lines made out of them. Then, we present comparisons with experimental results that demonstrate their accuracy. Finally, the theoretical model allows one to predict the high-frequency behavior of the artificial lines, showing that they are good candidates for implementing parametric amplifiers above 100 GHz.