Isothermal transformations in advanced high strength steels below martensite start temperature

Phase transformations during the decomposition of austenite below Ms in a low-carbon steel

Defect evolution during annealing of deformed FeSi alloys studied by positron annihilation spectroscopy.

On measurement of retained austenite in multiphase TRIP steels - results of blind round robin test involving six different techniques.

Shape recovery and ¿ -.¿ transformation in Fe29Mn7Si5Cr SMA

Shape recovery and epsilon-gamma transformation in Fe29Mn7Si5Cr SMA.

Microstructure and microtexture evolution of a TRIP-assisted steel after small deformation studied by EBSD technique.

Microstructure and texture of a lightly deformed TRIP-assisted steel characterized by means of the EBSD technique.

Formation of microstructure and texture in intercritically rolled C-Mn steel.

A study of texture evolution during deformation and annealing in Fe 3wt.-% Si by orientation contrast microscopy.

Texture evolution of tertiary oxide scale during steel plate finishing hot rolling simulation tests.

Three dimensional microstructure-microtexture characterisation of pipeline steel.

On the effect of texture in experimental grades of high-silicon electrical steel.

Study and texture evolution during deformation and annealing of an Fe3wt-%Si by orientation contrast microscopy.

Microstructure and texture determined toughness anisotropy in C-Mn steel.

A study of microstructural anisotropy of pipeline steel by means of 3D-EBSD.

Texture evolution of tertiary oxide scale during steel plate finishing hot rolling simulation tests.

Grain refinement by high temperature plane-strain compression of Fe-2%Si steel.

Toughness anisotropy in intercritically rolled steel plates.

Lamellar subdivision during accumulative roll bonding of a titanium interstitial free steel.