High traffic flow in a confined tunnel makes fire safety a critical issue. This paper proposed a digital twin framework for tunnel fire safety management in real-time, driven by dynamic sensor data and AIoT technologies. A deep learning model trained by the Transformer network and simulation dataset is used to predict real-time fire location and size. Then, the AI model is integrated into a 3D digital twin platform developed by the game engine Unity 3D. The performance of the proposed digital twin framework is demonstrated using numerical experiments and large-scale tunnel fire tests. Results show that the established AI model achieved promising accuracy in predicting fire location and power for both numerical and experimental data. The digital twin platform can also visualize the 3D fire scene that supports evacuation, firefighting, and emergency rescue. This research demonstrates the feasibility of using a 3D environment and digital twin in real-time fire safety management.

The ‘travelling fire’ models have been used to describe the localised and travelling burning of uniform fuel bed in large open-plan building space. However, fuel is typically distributed non-uniformly in the built environment, leading to complex fire spread behaviours. This paper investigates the effect of non-uniform fuel load distribution on fire development in a sufficiently-ventilated space. A series of fire tests up to 3.5 MW with different wood crib layouts are categorised into two types, i.e., non-uniform and continuous, and non-uniform and discontinuous. The leading and trailing edges of the flame, height of flame, and fire spread rates are estimated using visual evidence. The non-uniform fuel load distribution fundamentally changes the spreading behaviour of fire. On a continuous wood crib, the fire spread rate and fire size are generally proportional to the fuel load density when the arrangement of the wood crib is similar. However, when wood cribs are discontinuous, the fire dynamics depend more on the localised burning size and gaps between fuels. Furthermore, very distinct fire behaviours were observed for fuel loads with different porosity. This work reveals the possible under-estimation of fire hazards of assuming evenly distributed fuel load and suggests considering design fire scenarios of non-uniform fuel load distribution in the performance-based fire safety design.