This paper presents a mixed integer non-linear programming model to optimize, in a centralized fashion, the operation of multiple buildings in a microgrid. The proposed model aims to minimize the total cost of the energy imported from the main grid at the interconnection point, managing the power demand and generation of buildings, while operational constraints of the electrical grid are guaranteed. This approach considers the management of heating, ventilation, and air conditioning units, lighting appliances, photovoltaic generation and energy storage system of each building. Comfortable indoor conditions for the occupants are kept by a set of mathematical constraints. Additionally, a strategy that simplifies the original model is presented, based on a set of linearization techniques and equivalent representations, obtained through a pre-processing stage executed in EnergyPlus software. This strategy allows approximating the proposed model into a mixed integer linear programming formulation that can be solved using commercial solvers. The proposed model was tested in a 13-bus microgrid for different deterministic cases of study with non-manageable loads and smart buildings. A large-size test case is also considered. Finally, a rolling horizon strategy is proposed with the aim of addressing the uncertainty of the data, as well as reducing the amount of forecasting data required.

This paper presents a new mixed integer linear programing (MILP) model for the management of energy consumption and comfort in smart buildings. Initially, a detailed mixed integer non-linear programming (MINLP) model is formulated. The approach considers the management of heating, ventilation and air conditioning (HVAC) units, lighting appliances, photovoltaic generation (PV) and energy storage system (ESS). Then, a set of linear and equivalent representations are used to approximate the problem by an MILP model. The aims of the proposed model is to minimize the electricity bill by managing the loads, as well as the schedule of the ESS, meanwhile comfortable indoor conditions are ensured by a set of mathematical constraints. A commercial MILP solver was used to guarantee optimality. The strategy was tested in an university building with multiple zones. Comparisons between the proposed MILP model and simulations in EnergyPlus were used to validate the results.