Active flow control is demanding for new actuation technologies as none of the actual available actuators has reached all the criterions for expecting an implementation in the coming years. Here, a new type of pulsed jet is designed and preliminary measurements of its performances in quiescent flow are conducted. Pulsed operation has been chosen because of the expected high efficiency of pulsed actuation in comparison to continuous blowing. The traditional pulsed jets being limited in term of frequency because of the use of a mechanical valve to achieve the desired pneumatic opening and closing of a jet provided by an external pressure source, the fast response of electrical discharge is exploited in the present investigation. The objective is to modulate the output of a small jet exhausting from a pressurized chamber. A spark discharge is used to affect the thermodynamic state of the gas in order to electrically achieve periodic cancellation of the chocked flow conditions at the throat upstream the jet exit. In the present study, such actuator with additional neck extension and jet diameter enlargement is investigated. The configuration results in a high-speed subsonic jet whose velocity amplitude is modified by an arc discharge with deposited energy from 18 to 780 mJ. Some characteristics of the jet are provided using optical methods such as high-speed Schlieren and PIV. In particular, it is shown that the jet flow velocity can be increased from 50 m.s-1 to 190 m.s-1.