In autumn 2017 a network of 14 broadband seismic stations was deployed at the Theistareykir high temperature geothermal field (NE Iceland). This experiment was conducted as part of the current efforts to characterize the field's main structures, and possible short and long term stress variations due to the ongoing fluid injection and extraction operations which started in autumn 2017. In this work, we use two years of continuous seismic records (October 2017–October 2019) to compute a 3D shear wave velocity model of the geothermal field and to detect possible crustal stress changes related to the injection and production activities. From phase cross-correlations of the vertical component recordings, we measure the Rayleigh wave group velocity dispersion curves to obtain 2D group velocity maps between 1 and 5 s. Subsequently, we use a neighborhood algorithm to retrieve the 3D shear wave velocity model of Theistareykir. Mainly, two sets of elongated high and low velocity anomalies can be observed oriented in a NW/WNW direction, parallel to the lineaments of the active Tjörnes fracture zone. Velocity reductions west of Ketilfjall and at Baerjafjall could indicate the location of upflow zones of the magmatic reservoir or hydrothermal system. We analyzed the temporal evolution of phase and amplitude of phase auto-correlations using the stretching technique and discuss their behavior in relation to the geothermal field operations. We notice a slightly stronger long-term velocity decrease in the reservoir region compared to outer regions. This could be related to the mass depletion in that area (higher fluid extraction compared to the water reinjection). In summary, our findings show how a monitoring network can be set up to enable a detailed imaging and monitoring of reservoir behavior in general.

In volcanic and hydrothermal geosystems, monitoring of mass and stress changes provide information for both volcanic hazardassessment and estimation of geothermal resources. The combined continuous recording of the gravity field and ground motionwith sufficient accuracy in an active volcano-tectonic setting allows a better understanding of the mass and stress transfermechanisms that produce short term gravity changes and local seismic activity. The aim is to gain a better understanding ofgeothermal system processes by addressing short-term mass changes within geothermal reservoirs in relation to external influencessuch as anthropogenic (reservoir exploitation) and natural forcing (local and regional earthquake activity and earth tides). Thiscontributes to knowing the reservoir properties, structure and long-term behaviour.Þheistareykir (Northeast Iceland), where the geothermal power production started in autumn 2017 (2x45 MWe) is the site chosenfor this unique experiment. The overall goal of the project is to use a network of continuously measuring gravity meters to detectsmall variations in gravity associated with managing a geothermal field (injection and extraction). The gravity changes are expectedto be small: ~5 µgal/6 months (1 µgal=10-8 ms-2). Therefore, high performance and up-to-date instrumentation such assuperconducting gravity meters (SG), spring gravity meters and broadband seismometers are used. To achieve these goals, inautumn 2017 a network of 5 relative gravity meters (3 iGravs and 2 gPhones) and 14 seismic stations were deployed. Three gravitymonitoring sites are in close vicinity to the production and injection area, and one iGrav is set up outside the geothermal field forreference. Presented in this report are the details of the infrastructure and instruments deployed and the first results of more than 18months of continuous gravity and seismicity monitoring.

In volcanic and hydrothermal systems, monitoring of mass and stress changes by continuous gravity field and ground motion records provides information for both volcanic hazard assessment and estimation of geothermal resources. We aim at a better understanding of volcanic and geothermal system processes by addressing mass changes in relation with external influences such as anthropogenic (reservoir exploitation) and natural forcing (local and regional earthquake activity, earth tides). Þeistareykir is a geothermal field located within the Northern Volcanic Zone (NVZ) of Iceland on the Mid-Atlantic Ridge. Geothermal power production started in autumn 2017. For the first time on a geothermal production field, we deployed a network of 4 continuously recording gravity meters (3 superconducting meter, iGrav and one spring gravity meter gPhone) in order to cover the spatial and the temporal changes of gravity and to detect small variations related to the geothermal power plant operation (e.g. extraction and injection). All gravity monitoring stations are equipped with additional instrumentation to measure parameters that may affect the gravity records (e.g. GNSS and hydrometeorological sensors). Additionally, we deployed a temporal seismic network consisting of 14 broadband stations to enhance the seismic activity monitoring of the permanent Icelandic network in this very active region of the NVZ. Results of this unique experiment contribute to determine reservoir properties and main structures and may also reveal details of active tectonic processes. Here, we present the instrumental setup at the site and first results of more than 24 months of continuous gravity and seismicity records.