Interfacial wettability adjustment is a new method for intensifying vapor–liquid mass transfer process. Contact angle effect has been well investigated but not complete due to interfacial wettability consisting of both static behavior (contact angle) and dynamic behavior (contact angle hysteresis). Here, methods of adjusting contact angle hysteresis (CAH) were proposed, and then, the CAH effect on the hydrodynamics was investigated. A multiscale analysis of CAH effect, from interfacial force and wettability to single-bubble and gas–liquid two-phase flow inside the foam to bubble swarm hydrodynamics, was conducted, and thus, the hydrodynamic performance criteria were derived. The interfaces had similar contact angles, whereas a significant difference in the CAH was prepared by using the developed sol dip-coating and spray coating methods. Subsequent experiments revealed that lower CAH can decrease the pressure drop, homogenize the gas distribution, and increase the weeping rate, which are consistent with the derived criteria.@en

Reactive distillation (RD) is a process intensification technique that offers major advantages over conventional technologies by enabling the integration of reaction and separation into a single apparatus. This integration introduces and exploits complex interaction between mass transfer, chemical reaction and hydrodynamics within an RD column; however, these complexities can hinder the adoption of RD by industry. Many approaches have been developed by the scientific community to advance understanding and to expedite the initialization of RD design at the conceptual level. This paper critically discusses recent developments in conceptual methods for synthesizing RD processes. This review paper is the first to consider the range of available approaches for assessing the technical feasibility, controllability, economic viability, and sustainability of RD units by taking into account various configurations in which RD is treated as a new unit operation, and as part of process synthesis in a different way of designing processes based on functions. The review also addresses complex configurations, such as advanced RD technologies. Special attention is paid to process modeling and simulation as well as to education. Knowledge gaps to be filled by further research are indicated.@en