The structure of continental intraplate volcanic systems — which occur far from tectonic boundaries, unlike the majority of Earth's volcanism — is enigmatic and not fully understood, as are the underlying mechanisms responsible, due in part to a lack of high-resolution geophysical data. Central Mongolia contains Quaternary–Neogene aged alkaline basalt flows and volcanic cones, thousands of kilometres from active tectonic margins, in addition to an abundance of geochemical and petrological data — making this a natural laboratory to study intraplate volcanism. Using a recently collected, high-resolution, multi-scale, magnetotelluric dataset acquired across central Mongolia, we generate and analyze electrical resistivity models of the structure beneath the Tariat and Chuluut volcanic zones with the goal of imaging the volcanic system from surface to mantle source. The models reveal narrow, subvertical, lower resistivity anomalies in the middle-upper crust that are conspicuously located beneath surface expressions of volcanism. The lower crust (depths of 25–50 km) is characterized by the widespread distribution of isolated low-resistivity zones. A local low-resistivity zone is imaged in the mantle (depths of 60–90 km) above a broad, homogenous, doming low-resistivity feature. Considering the available evidence, we propose that the low-resistivity anomalies in the middle-upper crust are the remnant signatures of past transient magma pathways (or collection of pathways), caused by metasomatic alteration during the ascent of hot magmatic fluids. The lower crustal anomalies are interpreted to be domains of saline fluids in a thermally perturbed lower crust. In the mantle, the low-resistivity structure is explained by a broad mantle upwelling and thermal anomaly with a local zone of low-percent partial melt — the source for intraplate volcanism. The geophysical images are consistent with geochemical and petrological evidence from erupted lavas that indicates a single common mantle source region, limited crustal contamination, and rapid direct ascent, making crustal magma storage unlikely. Thus the geophysical models show remarkable and unique translithospheric images of a continental intraplate volcanic system, from surface to mantle source, with the results relevant to other continental regions@en

Crustal architecture strongly influences the development and emplacement of mineral zones. In this study, we image the crustal structure beneath a metallogenic belt and its surroundings in the Bayankhongor area of central Mongolia. In this region, an ophiolite belt marks the location of an ancient suture zone, which is presently associated with a reactivated fault system. Nearby, metamorphic and volcanic belts host important mineralization zones and constitute a significant metallogenic belt that includes sources of copper and gold. However, the crustal structure of these features, and their relationships, are poorly studied. We analyze magnetotelluric data acquired across this region and generate three-dimensional electrical resistivity models of the crustal structure, which is found to be locally highly heterogeneous. Because the upper crust (< 25 km) is found to be generally highly resistive (> 1000 Ωm), low-resistivity (< 50 Ωm) features are conspicuous. Anomalous low-resistivity zones are congruent with the suture zone, and ophiolite belt, which is revealed to be a major crustal-scale feature. Furthermore, broadening low-resistivity zones located down-dip from the suture zone suggest that the narrow deformation zone observed at the surface transforms to a wide area in the deeper crust. Other low-resistivity anomalies are spatially associated with the surface expressions of known mineralization zones; thus, their links to deeper crustal structures are imaged. Considering the available evidence, we determine that, in both cases, the low resistivity can be explained by hydrothermal alteration along fossil fluid pathways. This illustrates the pivotal role that crustal fluids play in diverse geological processes, and highlights their inherent link in a unified system, which has implications for models of mineral genesis and emplacement. The results demonstrate that the crustal architecture—including the major crustal boundary—acts as a first‐order control on the location of the metallogenic belt. [Figure not available: see fulltext.].@en

Central Mongolia is a prominent region of intracontinental surface deformation and intraplate volcanism. To study these processes, which are poorly understood, we collected magnetotelluric (MT) data in the Hangai and Gobi-Altai region in central Mongolia and derived the first 3-D resistivity model of the crustal and upper mantle structure in this region. The geological and tectonic history of this region is complex, resulting in features over a wide range of spatial scales, which that are coupled through a variety of geodynamic processes. Many Earth properties that are critical for the understanding of these processes, such as temperature as well as fluid and melt properties, affect the electrical conductivity in the subsurface. 3-D imaging using MT can resolve the distribution of electrical conductivity within the Earth at scales ranging from tens of metres to hundreds of kilometres, thereby providing constraints on possible geodynamic scenarios. We present an approach to survey design, data acquisition, and inversion that aims to bridge various spatial scales while keeping the required field work and computational cost of the subsequent 3-D inversion feasible. MT transfer functions were estimated for a 650 × 400 km2 grid, which included measurements on an array with regular 50 × 50 km2 spacing and along several profiles with a denser 5–15 km spacing. The use of telluric-only data loggers on these profiles allowed for an efficient data acquisition with a high spatial resolution. A 3-D finite element forward modelling and inversion code was used to obtain the resistivity model. Locally refined unstructured hexahedral meshes allow for a multiscale model parametrization and accurate topography representation. The inversion process was carried out over four stages, whereby the result from each stage was used as input for the following stage that included a finer model parametrization and/or additional data (i.e. more stations, wider frequency range). The final model reveals a detailed resistivity structure and fits the observed data well, across all periods and site locations, offering new insights into the subsurface structure of central Mongolia. A prominent feature is a large low-resistivity zone detected in the upper mantle. This feature suggests a non-uniform lithosphere-asthenosphere boundary that contains localized upwellings that shallow to a depth of 70 km, consistent with previous studies. The 3-D model reveals the complex geometry of the feature, which appears rooted below the Eastern Hangai Dome with a second smaller feature slightly south of the Hangai Dome. Within the highly resistive upper crust, several conductive anomalies are observed. These may be explained by late Cenozoic volcanic zones and modern geothermal areas, which appear linked to mantle structures, as well as by major fault systems, which mark terrane boundaries and mineralized zones. Well resolved, heterogeneous low-resistivity zones that permeate the lower crust may be explained by fluid-rich domains.@en

Southern Mongolia is part of the Central Asian Orogenic Belt, the origin and evolution of which is not fully known and is often debated. It is composed of several east–west trending lithostratigraphic domains that are attributed to an assemblage of accreted terranes or tectonic zones. This is in contrast to Central Mongolia, which is dominated by a cratonic block in the Hangai region. Terranes are typically bounded by suture zones that are expected to be deep-reaching, but may be difficult to identify based on observable surface fault traces alone. Thus, attempts to match lithostratigraphic domains to surface faulting have revealed some disagreements in the positions of suspected terranes. Furthermore, the subsurface structure of this region remains relatively unknown. Therefore, high-resolution geophysical data are required to determine the locations of terrane boundaries. Magnetotelluric data and telluric-only data were acquired across Southern Mongolia on a profile along a longitude of approximately 100.5° E. The profile extends ~ 350 km from the Hangai Mountains, across the Gobi–Altai Mountains, to the China–Mongolia border. The data were used to generate an electrical resistivity model of the crust and upper mantle, presented here, that can contribute to the understanding of the structure of this region, and of the evolution of the Central Asian Orogenic Belt. The resistivity model shows a generally resistive upper crust (0–20 km) with several anomalously conductive features that are believed to indicate suture zones and the boundaries of tectonic zones. Moreover, their spatial distribution is coincident with known surface fault segments and active seismicity. The lower crust (30–45 km) becomes generally less resistive, but contains an anomalously conductive feature below the Gobi–Altai zone. This potentially agrees with studies that have argued for an allochthonous lower crust below this region that has been relaminated and metamorphosed. Furthermore, there is a large contrast in the electrical properties between identified tectonic zones, due to their unique tectonic histories. Although penetration to greater depths is limited, the magnetotelluric data indicate a thick lithosphere below Southern Mongolia, in contrast to the previously reported thin lithosphere below Central Mongolia.[Figure not available: see fulltext.].@en

We present electrical resistivity models, derived from magnetotelluric data, of the crust beneath the Bulnay region, Mongolia. They reveal that the lower crust contains a pattern of discrete zones (width of ~25 km) of low resistivity (<30 Ωm). Such features may be an effect of unaccounted-for electrical anisotropy. However, when anisotropy is considered in the modeling, the features remain. We investigate an alternative explanation, based on a conceptual model of fluid localization and stagnation by thermally activated compaction, and demonstrate it is compatible with the observed low-resistivity zones. The model explains the location, shape, and size of the zones, with plausible values of the activation energy for lower crustal creep (270–360 kJ/mol), and a viscous compaction length on the order of 10 km. The results imply tectonic deformation and compaction processes, rather than lithological-structural heterogeneity, control the regional lower crustal fluid flow.@en