Twelve years (1991-2003) of ERS-1 and ERS-2 altimetry data have been reprocessed within the European Space Agency (ESA) reprocessing altimeter products for ERS (REAPER) project using an updated, modern set of algorithms and auxiliary models. The reprocessed data set (identified as RP01) has been cross-calibrated against the reprocessed ENVISAT V2.1 data. The format of this reprocessed data set is network common data form (version 3). The new data set shows a clear improvement in data quality beyond that of previous releases. The product validation shows reduction of the mean standard deviation of the sea-surface height differences from 8.1 (previously available product) to 6.7 cm (RP01). This paper presents the details of how the reprocessing was conducted and shows selected results from the validation and quality-assurance processes. The major improvements of the REAPER RP01 data set with respect to the previous ESA ERS radar altimetry (RA) products are due to the use of four ENVISAT RA-2 retrackers, RA calibration improvements, new reprocessed precise orbit solutions, ECMWF ERA-interim model for meteorological corrections, new ionospheric corrections, and new sea state. The intent of this paper is to aid the reader in understanding the benefits of the new data set for their particular use-case.@en

The main objectives of this paper are to present the status of the CryoSat ocean products and to give an overview of all associated quality control and validation activities. Launched in 2010, the polar-orbiting European Space Agency's (ESA) CryoSat mission was primarily developed to measure changes in the thickness of polar sea ice and elevation of the ice sheets. Going beyond its ice-monitoring objective, CryoSat is also a valuable source of data for the oceanographic community. The satellite's radar altimeter can measure high-resolution geophysical parameters from the open ocean to the coast. To enable their full scientific and operational exploitation, the ocean products continuously evolve and need to be quality-controlled and thoroughly validated via science-oriented diagnostics based on multi-platform in situ data, models and other satellite missions. In support to ESA, the CryoSat ocean validation teams conduct this quality assessment for both the near real time and offline ocean products, both over short time scales (daily and monthly monitoring) and long-term stability (annual trends). Based on the outcomes from these quality analyses and feedback from scientific oceanographic community, ESA intends to upgrade the CryoSat Ocean processing chain for Autumn 2017.@en