For smart grid assessment one needs to simulate varieties of components in different software environments. However, the existing simulation tools are domain oriented and cannot fulfil this need natively. Therefore, a smart grid simulation environment has to be established with accordingly accurate models for intra and inter-domain elements as well as interfaces and framework for coordination of those models in a holistic scenario. This paper presents part of the development of this smart grid simulation environment by implementing co-simulation interface for PSCAD using the mosaik framework based on functional mock-up interface (FMI). This co-simulation interface is tested using a modified dynamic model of IEEE 9 bus test system simulated in PSCAD while the wind turbine controller is simulated in MATLAB/Simulink. The results show a significant advantage over alternative methods in terms of a reduction in simulation runtime and compatibility with different simulation environments.

Work Package JRA2 has developed advanced simulation-based methods to check and validateSmart Grid scenarios, configurations and applications. The required models cover the various partsof Smart Grids, such as power system infrastructures, control algorithms, communication systems,market aspects or/and external factors like weather and people. The challenge is that the individualmodels of these parts are of very different nature (continuous, discrete, stochastic, etc.). From thetechnical perspective, this challenge has been overcome with the help of offline co-simulation, wherethe most suitable simulation tools for all considered domain can be coupled via the Functional Mockup Interface specification. From the methodological perspective, this challenge has been addressedby basing the work in JRA2 on ERIGrid’s holistic testing procedure.