Aquitards are common hydrogeological features and their hydraulic conductivity is an important property for various groundwater management issues. Predicting their hydraulic conductivity proves challenging, given its dependence on numerous variables. In this study, the dominant factors for predicting aquitard hydraulic conductivity are identified. To this end, a random forest model is trained on a dataset consisting of more than 1000 hydraulic conductivity measurements of core-scale sediment samples from a wide range of stratigraphic units and depths in the Netherlands. The dataset contains textural properties, such as the grain size distribution and porosity, as well as structural data, such as location, sampling depth, stratigraphical unit, lithofacies, organic carbon content, carbonate content and groundwater chloride concentration. Results show that clay fraction, stratigraphic unit, depth, lithofacies and x-coordinate are the most important features for predicting the hydraulic conductivity. Here, x-coordinate is presumably a proxy for distance from marine influence. Using a more detailed grain size distribution or using derived parameters such as the grain size percentiles does not improve the model any further. Our findings indicate that structural properties play a significant role in predicting aquitard conductivity, as they serve as indicators of processes such as compaction and soft-sediment deformation. The model is furthermore an effective method to estimate hydraulic conductivity for sediment samples without conducting costly and time-consuming hydraulic conductivity measurements.@en

Sediment is becoming scarce and fine sediments are progressively used for reclamation projects. Therefore there is an increasing need to use cohesive fine sediments (mud) for land reclamation and nature building. These sediments exhibit larger deformations and consolidation time than sandy sediment, and are therefore more challenging building materials to use. The MarkerWadden (Lake Markermeer, The Netherlands) is one of the first projects using fresh soft mud (with a low-strength and high water content) for wetland construction. In the research, the material properties of natural sediment from the Markermeer were determined and, the consolidation, drying and undrained shear strength was studied for varying solid compositions. Furthermore, the influence of vegetation and drainage during consolidation and drying was investigated.@en

Progressively, more dredged sediments are being reused for engineering projects. For example, the Marker Wadden is a new wetland constructed in lake Markermeer, the Netherlands, with dredged cohesive sediments originating from the bed of the lake. Such dredged sediments are often dominated by cohesive sediment particles with varying amounts of sand and organic matter. In addition, during and after the construction process, the material consolidates and is often compressed from a very loose state into a significantly denser condition. To assess the mechanical behavior of this material, the compressibility of the Markermeer dredged sediment samples with various sand and organic matter contents was analyzed with incremental loading oedometer tests, whereas the undrained shear strength was studied using the fall cone test. The behavior was theoretically analyzed assuming a fractal structure of the sediment and applying power law constitutive equations for effective stress, hydraulic conductivity, and undrained shear strength. These constitutive equations, usually used at low initial sediment densities, worked well at the relatively high initial densities studied and proved to be a useful tool to identify the transition fines content TFC. The constitutive equations were put in context with indicators traditionally used in soil mechanics. Samples, each with an identical composition of the fines fraction (particles< 63 μm), but with a sand content varying from 9 to 40%, showed the same compressibility and undrained shear strength behavior when considering the sand a filler material. For a natural sand content of 70%, the behavior was dominated by sand. The organic matter oxidation was observed to drastically decrease the compressibility and the shear strength, and even to decrease the amount of sand needed to exhibit sand-dominated behavior, showing the importance of the reactivity or state of organic matter on the TFC@en

Dredged cohesive sediment is progressively being used for wetland construction. However, little is known about the effect of plant growth during the self-weight consolidation of this sediment. In order to check the feasibility of such a study, a new experimental setup has been constructed. As an example, the effect of Phragmites australis on the consolidation and drainage of dredged sediment from Lake Markermeer, the Netherlands was investigated. The changes in pore water pressures at 10 cm depth intervals during a 129-day period in a column with and without plants were measured, while the water level was fixed at a constant level. Water loss via evaporation and plant transpiration was measured using Mariotte bottles and the photosynthetic processes — including plant transpiration — were measured with a LI-COR photosynthesis system. The results show that several processes initiated by Phragmites australis interfere with the physical processes involved in sediment drainage and consolidation. Phragmites australis effectively altered the pore pressure gradient via water extraction, especially between 40 and 60 cm from the bottom of the column. In this zone, daily cycles in pore pressures were observed which could directly be linked to the diurnal cycle of stomatal gas exchange. On average, water loss via evaporation and transpiration of leaves of Phragmites australis amounted to 3.9 mm day−1, whereas evaporation of bare soil amounted on average to 0.6 mm day−1. The depth-averaged hydraulic conductivity increased on average by 40% in presence of Phragmites australis. This pilot experiment confirms that the pressures sensors coupled with the new set-up enable to study pore pressure development over time and to link the effect of plant growth with alterations in water pressures profiles. A more systematic study with this set-up will in the future enable to quantify the effects of plant growth on consolidation.@en

In southwestern Bangladesh, clean drinking water is scarce, since rainwater is only available during the monsoon, pond water is often bacteriologically polluted, and groundwater may exhibit high salinity and arsenic levels. Managed aquifer recharge (MAR) might potentially provide safe drinking water by storing abundant freshwater from the wet season in aquifers for year-round use. Regional potential for MAR was determined by combining assessments of (1) social necessity for MAR by mapping areas with insufficient drinking water of acceptable quality; (2) regional technical suitability by determining the (a) impact of density-driven flow on freshwater recovery efficiency, and (b) vulnerability of recovered water to mixing with contaminated groundwater. These assessments were based on the largest groundwater quality dataset compiled to date in southwestern Bangladesh, which contains 3,716 salinity and 827 arsenic measurements. The results show there is some mismatch between social necessity and technical suitability. In some northern areas, necessity is low because good quality groundwater is present and hence, despite the high technical suitability, potential for MAR is reduced. In other northern areas, groundwater with unsafe arsenic levels or brackish groundwater is likely used for drinking. There, MAR is a technically suitable and safer option. In southern areas, where saline groundwater is widespread and people consume bacterially unsafe pond water, the high groundwater salinity calls for careful evaluation of MAR design, for which this study presents practical guidelines. The approach developed may be useful for mapping MAR potential based on social necessity and technical suitability in other saline deltas worldwide.@en

Aquitards are common hydrogeological features in the subsurface. Typically, pumping tests are used to parameterize the hydraulic conductivity of heterogeneous aquitards. However, they do not take spatial variability and uncertainty into account. Alternatively, core-scale measurements of hydraulic conductivity are used in geostatistical upscaling methods, for which their correlation lengths are needed, but this information is extremely difficult to obtain. This study investigates whether a pumping test can be used to obtain the correlation lengths needed for geostatistical upscaling and account for the uncertainty about heterogeneous aquitard conductivity. Random realizations are generated from core-scale data with varying correlation lengths and inserted into a groundwater flow model which simulates the outcome of an actual pumping test. The realizations yielded a better fit to the pumping test data than the traditional pumping test result, assuming homogeneous layers are selected. Ranges of horizontal and vertical correlation lengths that fit the pumping-test well are found. However, considerable uncertainty regarding the correlation lengths remains, which should be considered when parameterizing a regional groundwater flow model.@en

This study investigates the potential of bioturbating Tubificidae to alter biogeochemical processes by sediment aeration in order to enhance ecosystem development in eco-engineering projects. We introduced Tubificidae in three different densities (5000, 15,000, and 30,000 individuals m−2) in clay-rich sediment from lake Markermeer (The Netherlands). Redox potential, nutrients and major elements were measured from the water column and porewater at different depths. Mineral phase and redox transfers were chemically modelled and oxygen concentrations in bioturbated sediments for each density were mathematically predicted. The measured results of this experiment showed that Tubificidae oxygenated the upper 15 mm of the sediment. This resulted in decomposition of sedimentary organic matter with an associated sixfold increase in NH4 and NOx concentrations in the porewater and the water column. However, phosphorus concentrations were declining in the upper 16 mm, likely as a result of immobilization by pyrite oxidation and production of iron oxides. These bioturbation effects were highest in the treatment with an intermediate density of Tubificidae (15,000 worms m−2) as aeration effects in the treatment with the highest density of Tubificidae (30,000 worms m−2) was impeded by high respiration rates. Furthermore, with a two dimensional diffusion model, simulated effects of respiration and aeration on the oxygen concentration in the sediment suggest that the bioturbation effect is strongest at a density of 12,000 worms m−2. In ecological engineering projects where fast ecosystem development is important, introducing Tubificidae to aquatic sediments to optimal densities might enhance initial ecosystem development due to improved availability of nitrogen as nutrient.@en

This study investigates the potential of bioturbating Tubificidae to alter biogeochemical processes by sediment aeration in order to enhance ecosystem development in eco-engineering projects. We introduced Tubificidae in three different densities (5000, 15,000, and 30,000 individuals m−2) in clay-rich sediment from lake Markermeer (The Netherlands). Redox potential, nutrients and major elements were measured from the water column and porewater at different depths. Mineral phase and redox transfers were chemically modelled and oxygen concentrations in bioturbated sediments for each density were mathematically predicted. The measured results of this experiment showed that Tubificidae oxygenated the upper 15 mm of the sediment. This resulted in decomposition of sedimentary organic matter with an associated sixfold increase in NH4 and NOx concentrations in the porewater and the water column. However, phosphorus concentrations were declining in the upper 16 mm, likely as a result of immobilization by pyrite oxidation and production of iron oxides. These bioturbation effects were highest in the treatment with an intermediate density of Tubificidae (15,000 worms m−2) as aeration effects in the treatment with the highest density of Tubificidae (30,000 worms m−2) was impeded by high respiration rates. Furthermore, with a two dimensional diffusion model, simulated effects of respiration and aeration on the oxygen concentration in the sediment suggest that the bioturbation effect is strongest at a density of 12,000 worms m−2. In ecological engineering projects where fast ecosystem development is important, introducing Tubificidae to aquatic sediments to optimal densities might enhance initial ecosystem development due to improved availability of nitrogen as nutrient.@en

Sediment is becoming scarce. Therefore, soft sediments are progressively being used for nature building. The MarkerWadden is an example of an ongoing Building with Nature (BwN) project which aims to improve the ecology of Lake Markermeer (The Netherlands) by creating a wetland with the cohesive sediments from the bed of the lake. It represents one of the first projects using fresh unconsolidated mud as a filling material. However, building with these fine sediments represents a great challenge, because of their complex properties.@en

We studied the drying behavior of slurries of Markermeer sediments in the Netherlands having different solid compositions. Natural processes such as sand–mud segregation and oxidation of organic matter were mimicked to analyze the effect of changes in sediment composition. Evaporation experiments were performed with soft slurry samples using the Hyprop setup. Soil water retention curves (SWRCs) and hydraulic conductivity curves (HCCs) were determined as a function of the water ratio (WR, defined as volume of water/volume of solids). The sediment remained close to saturation until the end of the experiments. The Atterberg limits reduced significantly after sediment treatment involving drying at 50 °C, rewetting, and chemical oxidation. Furthermore, the oxidized sediment lost capacity to retain water. The SWRCs of sandy and oxidized clays were steeper, and fine-textured sediments showed large water ratios. At low matric suctions, the water retention capacity of the upper sediment samples containing more labile organic matter was larger than that of the sediment underneath. Clear correlations were found between van Genuchten parameters and the degree of degradation of the organic matter. The hydraulic conductivity of fine-textured samples with less labile organics was larger. The results give insight into the drying behavior of Markermeer sediment, currently used to build wetlands.@en

The geohydrological and hydrogeochemical factors that determine the contribution of PO4 from exfiltrating groundwater from a semiconfined aquifer to the PO4 balance of surface water, especially in ditches, were studied in a Dutch polder. Numerical flow modelling based on field data indicates that 30-90% of the upward seepage from the underlying aquifer is discharged via drains and the rest via the ditch bottom. Water level measurements and profiles of pore water quality in the ditch bottom show that groundwater flows to the ditch and to underground drains in winter, whereas in summer the water infiltrates the ditch bottom probably because of the high evapotranspiration rates. Phosphate stored in Fe oxihydroxides in the ditch bottom cannot be made available as a nutrient to the surface water during the growing season.@en