This study investigates the thermal performance of closed-loop advanced geothermal systems under the influence of groundwater flow in deep sedimentary formations. By integrating advective heat transport into a 3D numerical model, we evaluate the combined effects of groundwater flow in deep sedimentary aquifers and geothermal heat transport and extraction using U-shaped closed-loop geothermal wells. The model is developed to simulate heat-transfer dynamics, incorporating well design with realistic casing and cement layers, layered geology with associated petrophysical uncertainties, and varying operational conditions. As study area, we selected the Midyan basin in Saudi Arabia, characterized by thick sedimentary formations and an elevated geothermal gradient. The results show that the advective heat transfer, induced by groundwater flow, significantly enhances system efficiency. Improvement in thermal power output increases by up to 27% over a 40-year operational period compared to conduction-only scenarios, particularly if groundwater flow is perpendicular to the lateral section of the wellbore. Sensitivity analysis reveals that geothermal gradient and reservoir depth are the most impactful geological parameters. Operational parameters such as injection rates (10—100 kg/s) and injection temperatures (25—45 °C) can be adjusted to further optimize the system performance, with 30 kg/s identified as the optimal injection rate that balances energy extraction and parasitic pumping losses. Well-design parameters, including diameters (0.114–0.245 m) and lateral length (0.5–3 km), also play a critical role, with longer lateral sections and larger diameters increasing the overall power output. These findings show the potential of U-shaped closed-loop advanced geothermal systems in sedimentary basins with dynamic groundwater flow and provide insights for optimizing geothermal energy systems in similar geological settings.

The Kingdom of Saudi Arabia (KSA) has vast geothermal energy resources. When developed, these markedly strengthen the country's goals of achieving a carbon-neutral economy. To demonstrate the feasibility and techno-economic performance of small-scale, hydrothermal well doublet systems for direct use in KSA, we perform reservoir and wellbore flow and heat-transport simulations as well as an economic analysis. The maximum permissible flowrate is constrained to avoid thermoelastic fracturing in the near-wellbore region. Reservoir conditions of a sedimentary basin along the Red Sea coast (near Al Wajh) provide an ideal study case to which we add economic parameters considered representative for KSA. We derive a Levelized Cost of Heat (LCOH) ranging from 49 to 128 $/MWh for 50-mD hydrothermal doublet systems with an optimal well spacing of 600 m and a flowrate ranging from 110 kg/s to 50 kg/s. LCOH is strongly influenced by decreasing reservoir transmissivity. Also, a minimum injection temperature is required to avoid thermoelastic fracturing. Our economic analysis further highlights that capacity factor and well-drilling cost have the greatest impact on LCOH. Thus, this study provides a guide and workflow to conduct techno-economic investigations for decision-making, risk mitigation, optimizing geothermal-energy-extraction and economic-performance conditions of hydrothermal doublet systems.