The Thermodynamics of Advanced Fuels – International Database (TAF-ID) was developed using the Calphad method to provide a computational tool to perform thermodynamic calculations on nuclear fuel materials under normal and off-normal conditions. Different kinds of fuels are considered: oxide, metallic, carbide and nitride fuels. Many fission products are introduced as well as structural materials (e.g., zirconium, steel, concrete, SiC) and absorbers (e.g., B4C), in order to investigate the thermochemistry of irradiated fuels and to predict their chemical interaction with the surrounding materials. The approach to develop the database and the models implemented in the database are described. Examples of models for key chemical systems are presented. Finally, a few examples of application calculations on severe accidents with UO2 fuels, irradiated fuel chemistry of MOX and metallic fuels and metallic fuel/cladding interaction show how this tool can be used. To validate the database, the calculations are compared to the available experimental data. A good agreement is obtained which gives confidence in the maturity degree and quality of the TAF-ID database. The working version is only accessible to the participants of the TAF-ID project (Canada, France, Japan, the Netherlands, Republic of Korea, United Kingdom, USA). A public version is accessible by all the NEA countries. The current version contains models on the Am–Fe, Am–Np, Am-O-Pu, Am–U, Am–Zr, C–O–U-Pu, Cr–U, Np–U, Np–Zr, O–U–Zr, Re–U, Ru–U, Si–U, Ti–U, U-Pu-Zr, U–W systems. It is progressively extended with our published assessments. Information on how to join the project is available on the website: https://www.oecd-nea.org/science/taf-id/.@en

Thermodynamic measurements on BaMoO4, BaMoO3 and BaMo3O10 are reported, that served as input for the development of a thermodynamic model of the Ba-Mo-O system using the CALPHAD methodology. The valence states of molybdenum in BaMoO4 and BaMoO3 were confirmed to be VI and IV, respectively, from X-ray Absorption Near Edge Structure Spectroscopy measurements at the Mo K-edge. The heat capacity at low temperatures of these compounds was obtained from thermal-relaxation calorimetry. Phase equilibrium data in the BaMoO4-MoO3 section were also measured, and the transition enthalpy associated with the peritectic decomposition of BaMo3O10 was determined using Differential Scanning Calorimetry. The developed thermodynamic model used the compound energy formalism for intermediate compounds, and an ionic two-sublattice model for the liquid phase. The optimized Gibbs energies were assessed with respect to the known thermodynamic and phase equilibrium data. A good agreement is generally obtained, but a number of ill-defined data were also identified.@en

This work reports the thermodynamic modelling assessment of the rather complex Cs-Mo-O system, which is key for the understanding of fission products chemistry in oxide fuelled Light Water Reactors (LWRs) and next generation Sodium-cooled and Lead-cooled Fast Reactors (SFRs and LFRs). The model accounts for the existence of the ternary molybdates Cs2MoO4 (α and β), Cs2Mo2O7 (α and β), Cs2Mo3O10, Cs2Mo4O13, Cs2Mo5O16, and Cs2Mo7O22, for which sufficient structural and thermodynamic information are available in the literature. These phases are treated as stoichiometric in the model. The liquid phase is described with an ionic two-sublattice model, and the gas phase as an ideal mixture. The optimized Gibbs energies are assessed with respect to the known thermodynamic and phase equilibrium data in the Cs2MoO4-MoO3 pseudo-binary section. A good agreement is generally obtained within experimental uncertainties. The calculated vapour pressures above Cs2MoO4 (solid and liquid) are also compared to the available experimental data. Finally, isotherms of the Cs-Mo-O ternary phase diagram are calculated at relevant temperatures for the assessment of the fuel pin behaviour in LWRs, SFRs and LFRs.@en