In this paper, the comparative study carried out for focused wave interaction with a moving cylinder in ISOPE-2020 is reported. The fixed cylinder cases are reported in the companion paper as Part A (Sriram, Agarwal, Yan et al., 2021). The paper discusses qualitative and quantitative comparison between four different numerical solvers that participated in this comparative study. This is a challenging problem, as the cylinder moves over 40 m and interacts with the focusing waves. The performance of various solvers is compared for two different moving cylinder speeds. Both weakly coupled models and full Navier–Stokes (NS) solvers with different strategies for modeling the cylinder motion were adopted by the participants. In particular, different methods available for numerically simulating the forward speed problem emerge from this paper. The qualitative comparison based on the wave probe and pressure probe time histories between laminar and turbulent solvers is presented. Furthermore, the quantitative error analysis for individual solvers shows deviations up to 30% for moving wave probes and 50% for pressure time history. The reliability of each method is discussed based on all the wave probe and pressure probe discrepancies against experiments. The deviations for higher speed shown by all solvers indicate that further improvements in the modeling capabilities are required.

Fatigue crack growth (FCG) tests were conducted on a medium-Mn steel annealed at two intercritical annealing temperatures, resulting in different austenite (γ) to ferrite (α) phase fractions and different γ (meta-)stabilities. Novel in-situ hydrogen plasma charging was combined with in-situ cyclic loading in an environmental scanning electron microscope (ESEM). The in-situ hydrogen plasma charging increased the fatigue crack growth rate (FCGR) by up to two times in comparison with the reference tests in vacuum. Fractographic investigations showed a brittle-like crack growth or boundary cracking manner in the hydrogen environment while a ductile transgranular manner in vacuum. For both materials, the plastic deformation zone showed a reduced size along the hydrogen-influenced fracture path in comparison with that in vacuum. The difference in the hydrogen-assisted FCG of the medium-Mn steel with different microstructures was explained in terms of phase fraction, phase stability, yielding strength and hydrogen distribution. This refined study can help to understand the FCG mechanism without or with hydrogen under in-situ hydrogen charging conditions and can provide some insights from the applications point of view.