Water temperature is often monitored at water sources and treatment works; however, there is limited monitoring of the water temperature in the drinking water distribution system (DWDS), despite a known impact on physical, chemical and microbial reactions which impact water quality. A key parameter influencing drinking water temperature is soil temperature, which is influenced by the urban heat island effects. This paper provides critique and comprehensive summary of the current knowledge, policies and challenges regarding drinking water temperature research and presents the findings from a survey of international stakeholders. Knowledge gaps as well as challenges and opportunities for monitoring and research are identified. The conclusion of the study is that temperature in the DWDS is an emerging concern in various countries regardless of the water source and treatment, climate conditions, or network characteristics such as topology, pipe material or diameter. More research is needed, especially to determine (i) the effect of higher temperatures, (ii) a legislative limit on temperature and (iii) measures to comply with this limit.@en

The management of an Urban Drainage System (UDS) is a complex task, as it requires extensive knowledge about precipitation regime, hydrological features of the catchment, hydraulic characteristics of the drainage network, and information about the water use by the served inhabitants. Complex semi-distributed hydrological and physically based hydraulic models are nowadays available to summarise such information and run simulations. However, in many cases, the uncertainty of the available hydrological information hampers the use of complex models. Hence, simple models with few parameters and small computational effort may be preferable, especially for UDS management problems requiring the execution of many simulations. This paper proposes a convenient approach to define effective lumped Simplified Models (SMs) of UDSs, the parameters of which can be estimated directly from cartographic information. For several case studies of UDS with different morphological and topological characteristics, SMs were built, capable of reproducing the hydrographs provided by available semi-distributed Detailed Models (DMs), assumed as benchmark in absence of measured hydrographs. To this aim, the SWMM simulation software was used, and the SM lumped parameters were calibrated by maximising the goodness of fit between the hydrograph of the DM and of the SM. The results show that SMs satisfactorily predict the hydrographs for all the case studies, and that robust relationships between the calibrated parameters and morphological and topological characteristics of the UDS can be established. This suggests that SMs can be used by decision makers for preliminary design, planning studies and management problems of UDSs, as their parameters can be soundly estimated from cartographic information. An example of application of SMs to Combined Sewer Overflow prediction is also presented.@en