Silica-based glasses can be shaped into complex geometries using a variety of additive manufacturing technologies. While the three-dimensional printing of glasses opens unprecedented design opportunities, the development of up-scaled, reliable manufacturing processes is crucial for the broader dissemination of this technology. Here, we design and study phase-separating resins that enable light-based 3D printing of oxide glasses with high-aspect-ratio features and enhanced manufacturing yields. The effect of the resin composition on the microstructure, mechanical properties and delamination resistance of parts printed by digital light processing is investigated with the help of printing experiments, compression tests and electron microscopy analysis. The chemical composition and microstructure of the cured resins were found to strongly affect the stiffness, delamination resistance, and calcination behavior of printed parts. These findings provide useful guidelines to enhance the reliability and yield of the DLP printing process of multicomponent silica-based glasses.@en