Distillation is widely used for separating liquid mixtures, but its high heating demand poses challenges for achieving net-zero emissions. This study presents an innovative approach to electrifying distillation for load adaptability and flexible operation, aligning with dynamic electricity markets driven by renewables. The approach integrates flash vapor circulation and thermal storage into the distillation to optimize power usage and capitalizes on economic opportunities from load-flexible operation in response to fluctuating electricity pricing. A methanol/water distillation case study, using two typical electricity pricing scenarios, demonstrates that the proposed approach is more economically efficient than mechanical vapor recompression distillation, especially in lowering operational costs when the latter operates under fixed electricity pricing. However, compressor capital costs significantly impact overall costs, with sensitivity analysis examining different cost models. This approach can be applied to general distillation, allowing integration with the power sector and demand response programs, while enhancing flexibility, decarbonization, and efficiency.

As an important consideration in the chemical industry, chemical process safety has received notable attention in China. However, catastrophic chemical accidents still occur. To better understand why accidents continue to occur, this paper presented a diagnostic analysis of 14 major chemical accidents in China from 2012 to 2022 based on VOSviewer software. The authors analysed the correlation between the accident causation and their relationship with the safety management elements. The study observed that inferior process safety culture, intentional violation (rule-breaking) of procedure, inadequate safety training, and illegal operations were the most frequent causes of accidents. These causes highlighted the prominent gaps in PSM in China in the process safety culture, compliance with standards, the conduct of operations, process safety competency, and training & performance assurance. The results based on co-occurrence analysis indicated a strong correlation between these gaps in PSM. Enterprises should pay attention to collaborative management among them. These deficiencies in the enterprise's PSM system showed that the essential defects in China's chemical industry are a poor safety culture, inadequate accident investigation, inadequate training, and a lack of chemical safety personnel. The study recommended that the chemical industry establish superior process safety culture and competency for all personnel, monitor leading and lagging process safety indicators, apply inherent safety, and practice advanced safety management concepts. We hope that the findings can provide China's perspectives and strengths for global chemical safety.