The Water Informatics in Science and Engineering Centre for Doctoral Training (WISE CDT) offers a postgraduate programme that fosters enhanced levels of innovation and collaboration by training a cohort of engineers and scientists at the boundary of water informatics, science and engineering. The WISE CDT was established in 2014 with funding from the UK Engineering and Physical Sciences Research Council (EPSRC) amongst the universities of Bath, Bristol, Cardiff and Exeter. The WISE CDT will ultimately graduate over 80 PhD candidates trained in a non-traditional 4-year UK doctoral programme that integrates teaching and research elements in close collaboration with a range of industrial partners. WISE focuses on cohort-based education and equips the PhD candidates with a wide range of skills developed through workshops and other activities to maximise candidate abilities and experiences. We discuss the need for, the structure and results of the WISE CDT, which has been ongoing from 2013-2022 (final year of graduation). We conclude with lessons learned and an outlook for PhD training, based on our experience with this programme.@en

Reducing water use could impact existing sewer systems but this is not currently well understood. This work describes a new flow and wastewater quality model developed to investigate this impact. SIMDEUM WW® was used to generate stochastic appliance-specific discharge profiles for wastewater flow and concentration, which were fed into InfoWorks® ICM to quantify the impacts within the sewer network. The model was validated using measured field data from a sewer system in Amsterdam serving 418 households. Wastewater concentrations of total suspended solids (TSS), chemical oxygen demand (COD), total Kjeldahl nitrogen (TKN) and total phosphorus (TPH) were sampled on an hourly basis, for one week. The results obtained showed that the InfoWorks® model predicted the mass flow of pollutants well (R-values 0.69, 0.72 and 0.75 for COD, TKN and TPH respectively) but, due to the current lack of a time-varying solids transport model within InfoWorks®, the prediction for wastewater concentration parameters was less reliable. Still, the model was deemed capable of analysing the effects of three water conservation strategies (greywater reuse, rainwater harvesting and water-saving appliances) on flow, nutrient concentrations, and temperature in sewer networks. Results show through a 62% reduction in sewer flow, COD, TKN and TPH concentrations increased by up to 111%, 84% and 75% respectively, offering more favourable conditions for nutrient recovery.@en

Population growth and climate change put a strain on water resources; hence, there are growing initiatives to reduce water use. Reducing household water use will likely reduce sewer input. This work demonstrates the use of a stochastic sewer model to quantify the effect water conservation has on sewer hydraulics and wastewater concentration. Probabilistic discharge patterns have been developed using SIMDEUM WW® and fed into hydraulic modelling software InfoWorks ICM® to produce likely flow and quality profiles for five future water use scenarios. The scenarios tested were developed to outline how commercial and political factors may change water use in future. Scenario testing revealed that 15-60% water reduction reflected a 1-48% drop in the morning peak flow. The water use reduction was predicted to increase wastewater concentrations of chemical oxygen demand (COD), total Kjeldahl nitrogen (TKN) and total phosphorus (TPH) by 55-180%, 19-116% and 30-206% respectively. The sewer flow model was developed, calibrated and validated using a case study in the Wessex Water region of the UK and all future scenarios were compared to the validated baseline case. This wastewater flow and quality model allows scenario testing, which could help redesign future sewer networks to better prepare for water conservation strategies.@en

Population growth and climate change place a strain on water resources; hence, there are growing initiatives to reduce household water use. UKWIR (2016) have a stated aim to halve water abstraction by 2050. This will significantly reduce inflow to sewer systems and increase wastewater concentration. This work presents a new stochastic sewer model that can be used to predict both hydraulic and pollutant loading for various water saving scenarios. The stochastic sewer model is based on integration of the stochastic water demand model SIMDEUM® with the InfoWorks ICM® (Sewer Edition) hydraulic model and software. This model has been developed using foul sewer networks, i.e. where household discharges are the dominant inflow; however, it could also be used in combined sewage systems where rainwater flows would add to the stochastic dry weather flow (DWF). The stochastic sewer model was tested and validated on several real catchments in the Wessex Water area of the UK. Calibration was carried out using metered consumption data. The stochastic sewer model gives an accurate prediction of the diurnal patterns of sewage discharge at a household level and was validated using real flow measurements within the catchment. The results obtained indicate that this model can be used to accurately predict changes in flow due to water conservation. A preliminary study for the impact of low water use on this validated network model has been conducted and it was found that overnight and daytime flow was reduced by up to 80% whereas evening flows remained largely similar. Extended stagnation times were observed in the street scale pipes (150 mm) in the low water use scenario.@en