Tsunamis, impulse waves, and dam-break waves are rare but catastrophic events, associated with casualties and damage to infrastructures. An adequate description of these waves is vital to assure human safety and to generate resilient structures. Furthermore, a specific building geometry with openings, such as windows and doors, reduces wave-induced loads and increases the probability that a building withstands. However, waves often carry a large volume of debris, generating supplementary impact forces and creating debris dams around buildings, limiting the beneficial effects of the openings. Herein, a preliminary study on the three-dimensional (3D) effect of debris dams on postpeak wave-induced loads under unsteady flow conditions is presented based on laboratory experiments. Both wooden logs (forest) and shipping containers were tested, showing different behaviors. Shipping containers were associated with severe impact force peaks, whereas the interlocking nature of forest-Type debris provoked a compact debris dam, leading to higher and longer-lasting hydrodynamic forces. The arrangement of the debris also had an influence on the resulting structural loading. All tested scenarios were analyzed in terms of horizontal force, cantilever arm, and impulse acting on the building. This study presents a methodology to support the evaluation of postpeak debris-induced loads for the design of safer resilient buildings.

@en

Steady free-surface flows around buildings occurring during flood or tsunami events can produce major damages and a quantification of the post-peak forces is essential for safety and resilience of coastal structures. The loading process is highly affected by the flow Froude number and the drag coefficient, commonly defined for highly subcritical flows, while field observations of tsunami flows reported Froude numbers close to one, visually appearing as a choked regime. The present experimental study addresses the hydrodynamic forces on emerging buildings in a subcritical choked regime, focusing on the effect of openings and orientation. Laboratory experiments indicated a substantial difference in flow depths between the up- and downstream side of the building for increasing Froude numbers. The presence of openings induced a flow through the building lowering the difference in flow depth, limiting the effect of the hydrostatic component of the loading process. The formulation of an empirical resistance coefficient C_R allowed a combination of both form drag and hydrostatic forces. Whilst for impervious buildings C_R was consistent with reference studies, for buildings with openings C_R was directly dependent upon porosity. Contrarily to the unsteady flow conditions, results showed that the sidewalls also played a role in the loading process. Buildings with a rotated orientation resulted in slightly larger surfaces exposed to the flow and larger horizontal forces. Nevertheless, these were applied at lower cantilever arms, thus reducing the tilting moment. Altogether, this study provides experimentally-derived parameters that will support hydraulic engineers in the design of coastal structures.

@en

Tsunamis, impulse waves and dam-break waves represent extreme events that endanger human lives and generate damage to critical infrastructure. Recent events in the Indian Ocean (2004), in Japan (2011) and in Indonesia (2018) showed that constructive measures could be used to reduce the loads exerted on structures. Thus, the objective of this research is to study the loading process of different building configurations during wave impact. Through an extended experimental program, this research initially characterises the hydrodynamic behaviour of wet bed bores and dry surges in terms of their front celerity, water depths and velocity profiles behind the front. Then, the advantage of porous buildings in reducing inundation depths and loadings on the building is shown and discussed. Finally, this study provides simples formulae to predict the hydrodynamic load on a building, taking into account the effect of openings through an adapted resistance coefficient. These results reveal important information for the design of safer infrastructure that will act as vertical shelters in case of water related natural hazards.@en

Tsunamis, impulse-waves and dam-break waves have affected humanity in recent decades and the construction of vertical shelters can provide safety to people. However, for non-critical infrastructures, typically residential houses of lower height, overtopping is accepted during such events. This study experimentally quantifies the effect of building overtopping, i.e. water flowing over the roof, on the resulting loading process. Both surges and bores were investigated and the impact against buildings with two different heights was assessed. Detailed measurements of forces and moments allowed key differences to be captured between the scenarios with and without overtopping. Results showed that overtopping induced higher downstream water depths, leading to lower horizontal forces and a reduced resistance coefficient. Furthermore, cantilever arm, moment and impulse values were constantly lower in case of overtopping. Finally, this study presents an innovative methodology to assess the main loading features of buildings subject to overtopping, supporting engineers to design safer resilient structures.@en

Tsunami, impulse-waves and dam-break waves afflict humanity with casualties and damages. An insight into the flow mechanisms of these waves is important to provide safety and reduce reconstruction costs. This experimental study focuses on the effect of bed roughness on the main hydrodynamic properties of surges propagating on dry bed. In addition, the resulting wave impact forces on buildings with and without openings are studied. Results pointed out that dry bed surges on a rough bed had a lower front celerity and a higher flow depth, resulting into inundation depths during the impact around 20% higher as compared to the smooth bed. Furthermore, a rough bed induced a lower momentum flux during wave propagation, resulting into lower impact forces exerted on the building. The rough bed configuration also caused shorter impact durations, leading to lower impulse values transferred to the building. Results pointed out that even on rough bed, openings within the buildings linearly reduced impact forces, thus providing some helpful information for the design of safer coastal structures.@en

Unsteady flows such as tsunamis, impulse waves and dam-break waves can lead to damages and human losses. Hence, specific research to limit casualties and reconstruction costs is needed. The complexity of the phenomena involved suggests that a hybrid experimental-numerical approach should be used to gain a more comprehensive understanding of the process. This paper presents an explorative study on the comparison of SPH numerical simulations using a highly effective parallel computing technique with large scale experimental data for dry bed surges and wet bed bores impacting free-standing buildings with and without openings. These preliminary results showed a relatively good agreement between the two approaches in the estimation of water depths around the buildings, which represents a key parameter for the design of vertical shelters. Nevertheless, some differences observed during the impact phase may be attributed to the incapability of the SPH numerical simulations to fully capture the turbulent nature of the process and its air-entrainment. These validation tests with detailed experimental data are a promising approach to improve the numerical models toward the development of reliable numerical tools for a safer design of resilient structures.@en

A comprehensive understanding of physical phenomena based on a hybrid experimental-numerical approach supports a safer design of critical infrastructures. However, for large-scale tsunami-like waves, the reliability of numerical models was insufficiently validated. Herein, we validate our numerical model of tsunami-like waves by comparing simulation data (obtained using a smoothed panicle hydrodynamics method based on a highly efficient parallel computing technique) with large-scale experimental data for both, dry bed surges and wet bed bores. The presented preliminary results are believed to aid the development of experimentally validated numerical tools for a better understanding of tsunami-like flows.@en

The protection of river banks in mountain rivers by riprap requires large blocks with weights typically exceeding 1 t. Thus, the blocks have to be placed individually. Such packed riprap has a relatively small spacing between the blocks. Consequently, the interlocking forces between the blocks are high, and the resistance of this protection to erosion is increased compared with traditional dumped riprap used for bank protection in low-grade rivers. Based on 98 systematical laboratory experiments, an adapted design method was developed for the case of riprap riverbank protection using large, individually placed blocks. Three different block sizes were tested by varying the longitudinal channel slope and bank inclination. For comparison, 34 tests were performed with dumped riprap. A design relationship is presented as a function of block size relative to the flow depth and a modified block Froude number considering the mean flow velocity. The additional resistance of riprap to erosion with large, individually placed blocks compared with dumped riprap is quantified. The proposed equations are compared with existing riprap sizing equations. The suggested method proved to be reliable in the assessment of the stability of packed riprap. Furthermore, it is shown that a second layer significantly delays riprap failure.

@en

Tsunamis, impulse waves, and dam failures are disasters that challenge humanity, often leading to massive casualties and extreme economic losses. The highly unsteady flow conditions generated by such events are often in the form of turbulent bores. The purpose of this study was to investigate and validate a new generation system for bores propagating over dry and wet bed conditions. There are multiple techniques to generate such waves experimentally, and the study focused on the generation of tsunami-like inundation conditions through the vertical release of a water volume. A detailed methodology to characterize the generated waves hydraulically, in terms of their wave heights and flow velocities, is presented, and good agreement with the classical dam-break case for both dry bed surges and wet bed bores was demonstrated. Because of the importance of estimating the impact forces induced by such waves, particular attention was given to the wavefront celerity and the velocity profiles measured behind the wavefront; these were found in agreement with Prandtl's power law for open channel flows, and in-depth measurements allowed for the definition of an expression to estimate flow deceleration behind the wavefront. Along with considerations of the Froude number and momentum, this paper provides relevant information to assist engineers in designing safer infrastructures in areas prone to such extreme loading.@en

Previous studies and field surveys showed that specific structural designs can decrease the load on free-standing buildings along the coast, providing safer vertical shelters. This experimental study investigated the effect of openings in buildings (windows, doors and foyers) on horizontal forces and tilting moments induced by both dry bed surges and wet bed bores. Four configurations with seven porosity values ranging from 0% (impervious) to 84% (highly permeable) were systematically tested. Due to the presence of openings, the flow through the building reduced the upstream water depths. The porosity resulting from the presence of openings was shown to produce a linear reduction of the maximum horizontal force, when compared to the corresponding impervious building. The configuration with an impervious back showed results similar to those measured for the fully impervious buildings. The occurrence of the maximum tilting moment was shown to coincide with the maximum horizontal force and an estimation of the cantilever arm was therefore possible. The latter was constant for all configurations, independent of the geometry of the openings. Finally, two equations to predict the maximum horizontal force and the tilting moment were proposed, taking into account the effect of building openings within the resistance coefficient. These showed good agreement with experimental data and previous studies. These findings provide engineers with practical information for the design of safer vertical shelters in tsunami-prone areas.

@en

Tsunamis, landslide-generated waves, and dam failures are rare, but highly destructive phenomena, associated with extreme loading on infrastructure. Recent events showed that specific measures must be taken to guarantee safety of both people and the built environment. This experimental study investigates the forces and moments exerted on free-standing buildings that are induced by both surges and bores. The hydrodynamic impact was characterized by high splash, subsequently followed by a quasi-steady flow around the structure. For dry bed surges, the time history of the horizontal force was proportional to the momentum flux per unit width. For wet bed bores, an attenuation of the peak force due to the presence of an aerated front was observed and the introduction of a reduction coefficient was necessary to achieve a realistic force estimation. Additional force analysis in terms of peak time, wave height at maximum force and impulse also pointed out some key differences between forces exerted by dry bed surges and wet bed bores. The occurrence of the maximum tilting moment on the building coincided with the maximum horizontal force and an evaluation of the cantilever arm was possible. These findings provide engineers with practical information for the design of safer coastal structures.@en

Waves impacting against structures can create damages and devastation. This topic regained interest after some recent catastrophic events and the present paper investigates the main phases of a wave impacting against a residential house commonly observed in areas subject to tsunami hazards. The project is based on an experimental approach and both dry bed surges and wet bed bores were tested. Through some visual observations and high speed cameras, important run-up heights in the vertical direction were observed for all configurations; these were more intense for wet bed bores. For the largest waves a full overflow of the structure was observed and the presence of the structure provoked a change of regime and the upstream propagation of a bore.@en

In the context of a comprehensive research project investigating the hydrodynamic loading on structures with openings, this paper focuses on the wave generation techniques currently used and the test results associated with it, proposing a particular tsunami-like wave using a vertical water volume release mechanism. The latter allowed a certain volume of water to flow gravitationally from an upper reservoir into a lower basin through a set of pipes. The propagation of the resulting wave took place in a horizontal channel where wave height and velocities were measured. Both dry bed surges and wet bed bores were investigated, however the present paper mostly focuses on dry bed surges. The study indicated that the surges generated with this mechanism had similar behavior to those resulting from a dam-break technique and a good agreement between the experimental points and the theoretical solutions of Ritter (1892) and Whitham (1955) was found. Lastly some differences between wet bed bores and dry bed surges are presented and briefly discussed herein.@en