Copernicus Sentinel–1 is a C-Band Synthetic Aperture Radar (SAR) satellite mission within the European Copernicus Programme. The two satellites Sentinel-1A and -1B were launched in April 2014 and 2016, respectively. The Copernicus POD (Precise Orbit Determination) Service is responsible for the determination of orbital and auxiliary products required by the Payload Data Ground Segment (PDGS). Precise orbits are determined based on the dual-frequency GPS (Global Positioning System) data delivered by dedicated geodetic-grade GPS receivers on-board the satellites. Several updates in the operational orbit determination were done during the years including an update of the GPS antenna reference point coordinates. The switch to GPS carrier phase ambiguity-fixing was a major improvement. A reprocessing of the entire mission span of both satellites became necessary to provide a consistent orbit time series for the mission based on state-of-the-art models and processing settings. Due to the lack of independent observation techniques, the Sentinel-1 orbit quality has been assessed by analysing processing metrics, orbit overlaps and orbit comparisons. For this purpose, members of the Copernicus POD Quality Working Group (QWG) provided reprocessed Sentinel-1 orbit time series based on their software packages and their orbit determination settings. A weighted average of all five delivered solutions - a combined orbit - serves as reference for the comparisons. The quality and reliability of this reference orbit depends among others on the number of available orbit solutions and whether a manoeuvre has been performed during the processed day or not. The mean orbit consistency between all orbit solutions is below 1 cm in 3D RMS for the entire mission time interval for both satellites. Only few days show inferior quality due to data gaps or orbit manoeuvres. Following this sophisticated validation process, the reprocessed Sentinel-1 orbits from the Copernicus POD Service have been made available to the user community.

Sentinel-1A is the first satellite of the European Copernicus programme. Equipped with a Synthetic Aperture Radar (SAR) instrument the satellite was launched on April 3, 2014. Operational since October 2014 the satellite delivers valuable data for more than two years. The orbit accuracy requirements are given as 5. cm in 3D. In order to fulfill this stringent requirement the precise orbit determination (POD) is based on the dual-frequency GPS observations delivered by an eight-channel GPS receiver.The Copernicus POD (CPOD) Service is in charge of providing the orbital and auxiliary products required by the PDGS (Payload Data Ground Segment). External orbit validation is regularly performed by comparing the CPOD Service orbits to orbit solutions provided by POD expert members of the Copernicus POD Quality Working Group (QWG). The orbit comparisons revealed systematic orbit offsets mainly in radial direction (approx. 3. cm). Although no independent observation technique (e.g. DORIS, SLR) is available to validate the GPS-derived orbit solutions, comparisons between the different antenna phase center variations and different reduced-dynamic orbit determination approaches used in the various software packages helped to detect the cause of the systematic offset. An error in the given geometry information about the satellite has been found. After correction of the geometry the orbit validation shows a significant reduction of the radial offset to below 5. mm. The 5. cm orbit accuracy requirement in 3D is fulfilled according to the results of the orbit comparisons between the different orbit solutions from the QWG.