Metamaterials are a cla b of materials with extraordinary capabilities derived from their engineered structure. In 2017, Frenzel et al. (Science 358, 2017) conceptualized "three-dimensional mechanical metamaterials with a twist,"which convert linear deformation into rotational motion - a mechanical response that surpa bes the bounds of Cauchy continuum mechanics. However, the lack of suitable manufacturing technologies for producing metallic twist metamaterials has precluded their experimental validation and potential applications to date. Herein, 316L-stainle b-steel twist metamaterials are fabricated at various scales using an emerging sintering-based technology - lithography metal manufacturing (LMM) - and their mechanical responses are tested using stereo digital image correlation. Results provide the first empirical evidence of compre bion-induced rotation in steel twist metamaterials and highlight their sensitivity to manufacturing defects.

Multiprocess additive manufacturing (MPAM) unlocks new materials and design spaces where multimaterial components consisting of polymers, metals, and ceramics can be produced as one consolidated part. MPAM enables state-of-the-art 3D-printed electronics and devices with embedded functionality by combining fused deposition modeling with chemical deposition and electroplating processes. However, the metalized plastic devices produced by these processes have a short lifespan because of their poor structural integrity due to the low adhesion at the metal–polymer interface. In this study, we elaborated on the adhesion mechanism at the 3Dprinted metal–polymer interface and identified the MPAM factors that elevated significantly the integrity of metalized plastic components. The effects of the 3D-printed surface texture and surface treatment on the adhesion strength of copper plated on acrylonitrile–butadiene–styrene parts were analyzed. We found that a certain 3D-printed topography modified by quick acid etching created a hierarchically structured interface with superimposed macroscale, microscale, and nanoscale roughness that symbiotically improved the metal–polymer adhesion. These results have practical implications for automated equipment manufacturers and the electronic industry adapting MPAM for the 3D printing of multimaterial components and devices with embedded functionality.

Metamaterials possess properties not found in nature and are expected to revolutionise the design of structural components. However large-scale production of metallic metamaterials remains locked due to the compromise between print size and resolution in existing metal 3D printing methods. We unlock the possibility of 3D printing of stainless steel metamaterials across scales using lithography metal manufacturing, a vat photopolymerisation technology that uses digital light processing (DLP) on metal-filled resin to 3D print a green body for further debinding and sintering in a furnace. Here in, were explore the effects of energy dose on overpolymerisation, minimal feature size, and print resolution as well as the effects of sintering temperature on microstructure, shape stability, and mechanical properties of 3D printed metamaterials. It has become possible to 3D print steel metamaterials with a twist and auxetic metamaterials with micro-scaled structures on a decimetre scale. Our benchmarking experiments demonstrate that lithography metal manufacturing competes with laser powder bed fusion regarding print accuracy, surface roughness, and design freedom and provides a viable solution for translating metallic metamaterials from laboratories to markets.