Hi-5 is the L’-band (3.5-4.0 μm) high-contrast imager of Asgard, an instrument suite in preparation for the visitor focus of the VLTI. The system is optimized for high-contrast and high-sensitivity imaging within the diffraction limit of a single UT/AT telescope. It is designed as a double-Bracewell nulling instrument producing spectrally-dispersed (R=20, 400, or 2000) complementary nulling outputs and simultaneous photometric outputs for self-calibration purposes. In this paper, we present an update of the project with a particular focus on the overall architecture, opto-mechanical design of the warm and cold optics, injection system, and development of the photonic beam combiner. The key science projects are to survey (i) nearby young planetary systems near the snow line, where most giant planets are expected to be formed, and (2) nearby main sequence stars near the habitable zone where exozodiacal dust that may hinder the detection of Earth-like planets. We present an update of the expected instrumental performance based on full end-to-end simulations using the new GRAVITY+ specifications of the VLTI and the latest planet formation models.

Hi-5 is a proposed L' band high-contrast nulling interferometric instrument for the visitor focus of the Very Large Telescope Interferometer (VLTI). As a part of the ERC consolidator project called SCIFY (Self-Calibrated Interferometry For exoplanet spectroscopY), the instrument aims to achieve sufficient dynamic range and angular resolution to directly image and characterize the snow line of young extra-solar planetary systems. The spectrometer is based on a dispersive grism and is located downstream of an integrated optics beam-combiner. To reach the contrast and sensitivity specifications, the outputs of the I/O chip must be sufficiently separated and properly sampled on the Hawaii-2RG detector. This has many implications for the photonic chip and spectrometer design. We present these technical requirements, trade-off studies, and phase-A of the optical design of the Hi-5 spectrometer in this paper. For both science and contract-driven reasons, the instrument design currently features three different spectroscopic modes (R=20, 400, and 2000). Designs and efficiency estimates for the grisms are also presented as well as the strategy to separate the two polarization states.

Hi-5 is an ERC-funded project hosted at KU Leuven and a proposed visitor instrument for the VLTI. Its primary goal is to image the snow line region around young planetary systems using nulling interferometry in the L’ band, between 3.5 and 4.1 μm, where the contrast between exoplanets and their host stars is very advantageous. The breakthrough is the use of a photonic chip based beam combiner, which only recently allowed the required theoretical raw contrast of 10−3 in this spectral range. The VLTI long baseline interferometry enables to reach high angular resolution (4.2 mas at 3.8 μm wavelength with the Auxiliary Telescopes (ATs)), while high contrast detection is achieved using nulling interferometry. This polarisation requires a high degree of optical symmetry between the four pupils of the VLTI, only possible with precise phase, dispersion and intensity control systems. The instrument is currently in its design phase. In this paper, the warm optics design and the injection system up to the photonic chip are presented. The different properties of the design are presented including the optics used, the characteristics of the four beams and the current drawbacks. Particular attention is devoted to the optical alignment and the tolerance analysis in order to estimate the precision required for the alignment procedure and therefore to choose adapted optical mountings.