The Azambuja fault is a NNE trending structure located 50 km north of Lisbon, the capital and most populous city of Portugal. The fault has been considered as a possible source for the historical, large earthquakes. Understanding this fault is a priority in seismic hazard evaluation of this region. The fault has a clear morphological signature. Miocene and Pliocene sediments are tilted eastward and cut by steeply dipping mesoscale fault segments, presenting reverse and normal offsets with a net downthrow to the east. Neotectonic studies indicate a Quaternary slip on the fault of 0.05–0.06 mm/year. However, no direct evidence of the Azambuja fault affecting the Pleistocene or Holocene sediments was found so far. Here, we present the findings from high-resolution seismic reflection studies using both P- and S-waves over the Holocene deposits. The detection of small-throw faulting in ductile sediments is a challenging task. We show that multiple signatures, like perturbations in the reflection hyperbolae visible in shot and CMP gathers, interruptions of reflectors in stacked sections, lateral seismic velocity variations obtained by horizon velocity analysis, all at coincident locations, strongly suggest that the activity of the Azambuja fault has affected the Holocene sediments in the study area. The lateral velocity variations are corroborated by wavepath eikonal traveltime tomography and velocity analysis supported by seismic modeling. By means of 2D viscoelastic modeling, we explain the absence of fault-related diffractions and negligible back-scattered energy from the fault. Using data from nearby boreholes, we find that the 15 ka old alluvium cover has indeed been disturbed by the presence of shallow fault strands. Considering the estimated vertical throws and the empirical relationships between fault length, co-seismic rupture and magnitude, a slip rate of 0.07 mm/y, slightly larger than previously thought, is expected for this fault.

To evaluate and upscale the feasibility of using exploration tunnels in an operating mine for active-source seismic imaging, a seismic experiment was conducted at the Neves-Corvo mine, in southern Portugal. Four seismic profiles were deployed in exploration drifts approximately 650 m beneath the ground surface, above the world-class Lombador volcanogenic massive sulfide deposit. In addition to the tunnel profiles, two perpendicular surface seismic profiles were deployed above the exploration tunnels. The survey was possible due to a newly developed prototype global positioning system (GPS) time transmitter enabling accurate GPS synchronization of cabled and nodal seismic recorders, below and on the surface. Another innovative acquisition aspect was a 1.65 t broadband, linear synchronous motor (LSM) driven - electric seismic vibrator (e-vib) used as the seismic source along two of the exploration tunnels. We have evaluated the challenges and innovations necessary for active-source tunnel seismic acquisition, characterized by high levels of vibrational noise from the mining activities. In addition, we evaluated the LSM vibrator's signal and overall seismic-data quality in this hard rock mining environment. Our processing results from the tunnel data and 3D reflection imaging of the Lombador deposit below the exploration tunnels were checked for consistency through constant-velocity 3D ray-tracing traveltime forward modeling. For imaging purposes, 3D Kirchhoff prestack depth and poststack time-migration algorithms were used, with both successfully imaging the targeted deposit. The results obtained show that active-source-seismic imaging using subsurface mining infrastructure of operational mines is possible. However, it requires innovative exploration strategies, a broadband seismic source, an accurate GPS-time system capable of transmitting GPS-time hundreds of meters below the surface, and careful processing. The results obtained open up possibilities for similar studies in different mining or tunneling projects.