This work examines the self-collimation effect of silk materials on fluorescence emission/detection. A macroscopic regulation strategy, coupled with meso-reconstruction and meso-functionalization, is adopted to amplify the fluorescence emission of organic fluorescent dyes (i.e., Rhodamine 6G (R6G)) using silk photonic crystal (PC) films. The fluorescence emission can be linearly enhanced or inhibited by a PC as a result of the photonic bandgap coupling with the excitation light and/or emission light. Depending on the design of the silk fluorescence collimator, the emission can reach 49.37 times higher than the control. The silk fluorescence collimator can be applied to achieve significant benefits: for instance, as a humidity sensor, it provides good reproducibility and a sensitivity of 28.50 a.u./% relative humidity, which is 80.78 times higher than the sensitivity of the control, and as a novel curtain, it raises the energy conversion efficiency of the semitransparent dye-sensitized solar cells (DSSCs) by 16%.@en

Wearable electronic textiles based on natural biocompatible/biodegradable materials have attracted great attention due to applications in health care and smart clothes. Silkworm fibers are durable, good heat conductors, insulating, and biocompatible, and are therefore regarded as excellent mediating materials for flexible electronics. In this paper, a strategy on the design and fabrication of highly flexible multimode electronic textiles (E-textile) based on functionalized silkworm fiber coiled yarns and weaving technology is presented. To achieve enhanced temperature sensing performance, a mixture of carbon nanotubes and an ionic liquid ([EMIM]Tf2N) is embedded, which displays top sensitivity of 1.23% °C−1 and stability compared with others. Furthermore, fibrous pressure sensing based on the capacitance change of each cross-point of two yarns gives rise to highly position dependent and sensitivity sensing of 0.136 kPa−1. Based on weaving technologies, a unique combo textile sensor, which can sense temperature and pressure independently with a position precision of 1 mm2, is obtained. The application to intelligent gloves endows the position dependent sensing of the weight, and temperature distribution sensing of the temperature.@en