For planetary gear has the characteristics of small volume, light weight and large transmission ratio, it is widely used in high speed and high power mechanical system. Poor working conditions result in frequent failures of planetary gear. A method is proposed for diagnosing faults in planetary gear based on permutation entropy of Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) Adaptive Neuro-fuzzy Inference System (ANFIS) in this paper. The original signal is decomposed into 6 intrinsic mode functions (IMF) and residual components by CEEMDAN. Since the IMF contains the main characteristic information of planetary gear faults, time complexity of IMFs are reflected by permutation entropies to quantify the fault features. The permutation entropies of each IMF component are defined as the input of ANFIS, and its parameters and membership functions are adaptively adjusted according to training samples. Finally, the fuzzy inference rules are determined, and the optimal ANFIS is obtained. The overall recognition rate of the test sample used for ANFIS is 90%, and the recognition rate of gear with one missing tooth is relatively high. The recognition rates of different fault gears based on the method can also achieve better results. Therefore, the proposed method can be applied to planetary gear fault diagnosis effectively.@en

Poor working environment leads to frequent failures of planetary gear trains. However, complex structure and variable transmission make the vibration signal strongly non-linear and non-stationary, which brings big problems to fault diagnosis. A method of planetary gear fault diagnosis via feature image extraction based on multi central frequencies and vibration signal frequency spectrum is proposed. The original vibration signal is decomposed by variational mode decomposition (VMD), and four components with narrow bands and independent central frequencies are decomposed. In order to retain the feature spectrum of the original vibration signal as far as possible, the corresponding feature bands are intercepted from the frequency spectrum of original vibration signal based on the central frequency of each component. Then, the feature images of fault signals are constructed as the inputs of the convolution neural network (CNN), and the parameters of the neural network are optimized by sample training. Finally, the optimized CNN is used to identify fault signals. The overall fault recognition rate is up to 98.75%. Compared with the feature bands extracted directly from the component spectrums, the extraction method of the feature bands proposed in this paper needs fewer iterations under the same network structure. The method of planetary gear fault diagnosis proposed in this paper is effective.@en