This paper describes an investigation into the use of advanced manufacturing techniques for the creation of a new class of intermeshed steel connections that rely on neither welding nor bolting. The project detailed herein lays the groundwork to transform the steel building construction industry by advancing the underlying science and engineering precepts for intermeshed connections created from precise, volumetric cutting. The proposed system enhances the integration between design, fabrication, and installation. Fully automated, precise, volumetric cutting of open steel sections poses challenges regarding the load-Transfer mechanisms and failure modes for intermeshed connections. Implementation of the intermeshed connection would cause a discontinuity in the beam; therefore, the effects of such a configuration on the behavior of the steel frame are investigated in the current paper. Load resistance and design of these connections are also explored with physical tests and finite element modeling to investigate the mechanics of intermeshed connections, including stress and strain concentrations, fracture and failure modes, and connection geometry optimization.

This paper presents the work carried out on a collaborative tripartite project between the USA, Republic of Ireland and Northern Ireland to create and investigate the design, development and testing of a new class of intermeshed steel connections (ISCs) that do not rely on field welding and minimise bolting, thus targeting the facilitation of fast disassembly of steel structures and material reuse. This research took advantage of fully automated, precise, advanced manufacturing cutting technologies (e.g. laser, waterjet and high-definition plasma cutting) to achieve a connection method in steel that previously was only possible in materials such as timber, with the potential to revolutionise the steel construction industry. The paper outlines the ongoing research work by the collaborative team, focusing on the design, fabrication, finite-element analysis (FEA) and scaled experimental testing of side ISCs for the flanges of open sections, which included the use of state-of-the-art digital image correlation technology for non-contact measurements. A simplified connection design procedure is presented based on yielding of the side plates. This design procedure is refined based on the results of experimental testing and FEA of the local axial behaviour of the flange connection, addressing stress concentrations in the flange, fabrication tolerances and material overstrength.