As a kind of clean renewable energy, the production and utilization of geothermal resources can make a great contribution to optimizing the energy structure and energy conservation and emission reduction. The circulating heat extraction process of working fluid will disturb the equilibrium state of physical and chemical fields inside the reservoir, and involve the mutual coupling of heat transfer, flow, stress, and chemical reaction. Revealing the coupling mechanism of flow and heat transfer inside the reservoir during geothermal exploitation can provide important theoretical support for the efficient exploitation of geothermal resources. This paper reviews the research advances of the multi-field coupling model in the reservoir during geothermal production over the past 40 years. The thrust of this paper is on objective analysis and evaluation of the importance of each coupling process and its influence on reservoir heat extraction performance. Finally, we discuss the existing challenges and perspectives to promote the future development of the geothermal reservoir multi-field coupling model. An accurate understanding of the multi-field coupling mechanism, an efficient cross-scale modeling method, as well as the accurate characterization of reservoir fracture morphology, are crucial for the multi-field coupling model of geothermal production.@en

The chemical reaction in the reservoir causes fracture deformation during the heat extraction of enhanced geothermal systems (EGS), affecting thermal performance. The reaction rate is sensitive to temperature, concentration, and reaction-specific surface area. While previous research mainly focuses on the influence of temperature and concentration on fracture deformation, conversely, the effect of fracture morphology(aperture and tortuosity) is ignored. In this study, the deformation characteristics of rough and flat fractures are compared, and the influences of aperture and tortuosity on fracture deformation are analyzed. According to the influence law, the fracture deformation relationship equation between the aperture deformation rate with tortuosity and aperture is fitted. Results show that the deformation of rough fracture is significantly higher than that of flat fracture, and the variations of fracture aperture increase with the aperture and tortuosity. Furthermore, the influence of tortuosity (the variation of aperture increased by 47.97% when the tortuosity increased from 1 to 1.5) is greater than the aperture (that increased by 4.8% when the aperture increased from 0.2 to 1). The rate of aperture change is a logarithmic function of tortuosity and a power function of the aperture. These results provide significant references for the study of EGS, subsurface karst et al.@en

Conventional wastewater treatment plants (WWTPs) clean wastewater and minimize water pollution; but, while doing so, they also contribute to air pollution and need energy/material input with associated emissions. However, energy recovery (e.g. anaerobic digestion) and resource recovery (e.g. water reuse) allow us to offset the adverse environmental impacts of wastewater treatment. Life cycle assessments (LCA) have been used more and more to evaluate the environmental impacts of WWTPs and to suggest improvement options. There is a need to search for resource recovery applications that genuinely realize a net-zero impact on the total environment of WWTPs. In this work, a scheme with highly efficient energy and resource recovery (especially for thermal energy) is proposed and evaluated. The environmental impact of a conventional WWTP in comparison with the scheme proposed here, with energy/resource recovery included, was calculated, and discussed with reference to LCA methodology. In the process of using LCA, it was necessary to choose a regional situation to focus on. In this case, a Chinese situation was focused as a reference, but the qualitative information gained is of worldwide relevance. The results clearly revealed that conventional WWTP does not benefit the total environment as a whole while the new scheme benefited the total environment via resource/energy recovery-based processes. Among others, thermal energy recovery played a significant role towards a net-zero LCA analysis (contributing around 40%) which suggests that more attention and research should be focused on it.@en

The fractures are the main flow and heat transfer channel for fluids in deep high-temperature enhanced geothermal systems (EGS). The deformation of the fracture controlled by reactive flow is a common phenomenon during geothermal development, which might lead to a reduction in the system's thermal performance and operating life. While most previous research focuses on the influence of fracture deformation on system heat extraction performance, conversely the fracture deformation mechanism caused by the reactive flow is ignored. In this paper, a coupled thermal-hydraulic-chemical-deformation (THCD) model is established to investigate the fracture deformation mechanism. The deformation behavior of quartz and anorthite is compared, and the Damkohler number (Da) is adopted to explore the reaction mechanism. Meanwhile, the influence mechanism of concentration and temperature on fracture deformation is also analyzed. Results show that the Da at the fracture surface is 10−12 -10−8, which means that the deformation of the fracture is controlled by the reaction rate. Compared with the concentration, the influence of temperature on fracture deformation is complex, and there is an inflection point. The inflection point is governed by the mineral reaction kinetics. These results provide significant references for the efficient heat extraction of the EGS.@en