In the collaborative effort towards standardisation of out-of-plane permeability measurement, an international benchmarking exercise was carried out whereby 19 participants worldwide were instructed to measure the out-of-plane permeability following a number of strict guidelines, informed by the outcomes of the first international benchmarking exercise completed in 2021. This paper presents the results of the exercise and an assessment of the reproducibility of the data and the suitability of the proposed test method. The data returned were subjected to a number of statistical analysis methods, which showed that adherence to the test guidelines resulted in a high likelihood of a participant not being an outlier and therefore providing evidence that the test method proposed in this paper is a suitable way forward for a standardised test method.

Permeability measurements of engineering textiles exhibit large variability as no standardization method currently exists; numerical permeability prediction is thus an attractive alternative. It has all advantages of virtual material characterization, including the possibility to study the impact of material variability and small-scale parameters. This paper presents the results of an international virtual permeability benchmark, which is a first contribution to permeability predictions for fibrous reinforcements based on real images. In this first stage, the focus was on the microscale computation of fiber bundle permeability. In total 16 participants provided 50 results using different numerical methods, boundary conditions, permeability identification techniques. The scatter of the predicted axial permeability after the elimination of inconsistent results was found to be smaller (14%) than that of the transverse permeability (∼24%). Dominant effects on the permeability were found to be the boundary conditions in tangential direction, number of sub-domains used in the renormalization approach, and the permeability identification technique.

A polarized 3He target, which uses conventional optical pumping with 4He discharge lamps, is described. Emphasis is given to the experience gained with its use during nuclear scattering experiments using proton beams from the University of Manitoba cyclotron. An analysis of possible errors in present and past experiments is given.