A novel follow-the-leader approach for azimuth-driven vessels is devised and experimentally tested in a model-scale outdoor scenario. The vessels are equipped with global navigation satellite and inertial navigation systems. A line-of-sight algorithm ensures the yaw-check ability of the follower vessel along the leader's path, while a speed-regulation allows to track its velocity. Track generation, guidance, navigation, and control modules are designed and assembled to be executed on-board in real time. The results of an outdoor experimental campaign are illustrated to show the effectiveness of the proposed approach.@en

Dynamic positioning systems are most commonly used in offshore operations. They provide an automated controlling of position and heading of the vessel using its own thrusters to compensate environmental disturbances. The allocation of total required force over the available actuators is a complex task, as DP-systems are over-actuated. Therefore, one of the main challenges faced by the industry is constantly seeking to improve the systems efficiency for both sustainability and economic reasons. Furthermore, it is important to evaluate the performance of a DP vessel under critical conditions. In this paper, the authors aim to compare different thrust allocation logics based on the optimisation of different objective functions. Using a simple validation tool, the authors were able to investigate the overall efficiency of a dynamic positioning propulsion system and its ability to operate when a failure occurs.@en

This paper presents an effective autonomous follow-the-leader strategy for Azimuthal Stern Drive vessels. The control logic has been investigated from a theoretical point of view. A line-of-sight algorithm is exploited to ensure yaw-check ability, while a speed-check feature is implemented to track the velocity of the target along the path. For this purpose, a linearised manoeuvrability model for azimuthal drive surface vessels is presented. A model-based control synthesis is proposed to ensure the stability of the closed-loop system and robust PID controllers are designed by using Linear Matrix Inequalities technique. The control strategy has been successively validated in two steps, initially by using simulation techniques, and then experimentally using an outdoor scenario with model scale tugs. The path planning, navigation, guidance and control modules are studied, detailed, and digitally implemented on-board of the model scale tugs. The models are supplied with GNSS+INS navigation system. Low-level management and control of Azimuthals angles and shaft revolutions is implemented on-board. High-level decen-tralised path planning, guidance, and control sequence evaluation are dealt with at a remote ground station. In particular, the presented follow-the-leader strategy meets the most generic needs of platooning convoys, and, in the specific instance, of Escort convoy tugs. The operative profile of the latter concerns long-lasting and routine chases with the continuous demand of tuning heading and speed to track the target vessels, until the rare occurrence of an emergency event. In a realistic scenario, the proposed control system would be beneficial for the tug master’s lucidity and alertness, while reducing avoidable risks. At the end of the paper, the results of the experimental campaign are shown to demonstrate the effectiveness of the proposed control logic.@en