Improving the resilience of water distribution systems (WDSs) to handle natural disasters (e.g., earthquakes) is a critical step toward sustainable urban water management. This requires the water utility to be able to respond quickly to such disaster events, and in an organized manner, to prioritize the use of available resources to restore service rapidly while minimizing the negative impacts. Many methods have been developed to evaluate the WDS resilience, but few efforts are made so far to improve the resilience of a postdisaster WDS through identifying optimal sequencing of recovery actions. To address this gap, the authors propose a new dynamic optimization framework in this study in which the resilience of a postdisaster WDS is evaluated using six different metrics. A tailored genetic algorithm is developed to solve the complex optimization problem driven by these metrics. The proposed framework is demonstrated using a real-world WDS with 6,064 pipes. Results obtained show that the proposed framework successfully identifies near-optimal sequencing of recovery actions for this complex WDS. The gained insights, conditional on the specific attributes of the case study, include the following: (1) the near-optimal sequencing of a recovery strategy heavily depends on the damage properties of the WDS; (2) replacements of damaged elements tend to be scheduled at the intermediate-late stages of the recovery process due to their long operation time; and (3) interventions to damaged pipe elements near critical facilities (e.g., hospitals) should not be necessarily the first priority to recover due to complex hydraulic interactions within the WDS.

Thermal energy recovery from drinking water has a high potential in the application of sustainable building and industrial cooling. However, drinking water and biofilm microbial qualities should be concerned because the elevated water temperature after cold recovery may influence the microbial activities in water and biofilm phases in drinking water distribution systems (DWDSs). In this study, the effect of cold recovery on microbial qualities was investigated in a chlorinated DWDS. The chlorine decay was slight (1.1%–15.5%) due to a short contact time (~60 s) and was not affected by the cold recovery (p > 0.05). The concentrations of cellular ATP and intact cell numbers in the bulk water were partially inactivated by the residual chlorine, with the removal rates of 10.1%–16.2% and 22.4%–29.4%, respectively. The chlorine inactivation was probably promoted by heat exchangers but was not further enhanced by higher temperatures. The higher water temperature (25 °C) enhanced the growth of biofilm biomass on pipelines. Principle coordination analysis (PCoA) showed that the biofilms on the stainless steel plates of HEs and the plastic pipe inner surfaces had totally different community compositions. Elevated temperatures favored the growth of Pseudomonas spp. and Legionella spp. in the biofilm after cold recovery. The community functional predictions revealed more abundances of five human diseases (e.g. Staphylococcis aureus infection) and beta-lactam resistance pathways in the biofilms at higher temperature. Compared with a previous study with a non-chlorinated DWDS, chlorine dramatically reduced the biofilm biomass growth but raised the relative abundances of the chlorine-resistant genera (i.e. Pseudomonas and Sphingomonas) in bacterial communities.