We present a sub-10-µW fully integrated SoC for on-device spoken language understanding (SLU). Its analog feature extractor (FEx) applies global and per-channel automatic gain control (AGC) to extend the system’s dynamic range (DR)—a critical requirement for real-world scenarios, including far-field operations. The on-chip streaming-mode recurrent neural network (RNN) accelerator exploits temporal sparsity and pooling, reducing its power by 2.3x. By combining hardware-aware training with a behavioral model of the FEx that captures circuit nonidealities, the network is trained to maintain SLU accuracy despite chip-to-chip variation. Fabricated in a 65-nm CMOS process, the SoC occupies 2.23 mm ² and consumes 8.62 µW for end-to-end SLU. The 16-channel FEx achieves 93-dB DR while dissipating 1.85 µW at 100-Hz feature frame rate. The SoC is evaluated on the 32-class Fluent Speech Commands dataset (FSCD), achieving 92.9% accuracy for 2.8-mV _rms inputs while maintaining >85% accuracy over a 75-dB input range.

Keyword spotting (KWS) is an important task on edge low-power audio devices. A typical edge KWS system consists of a front-end feature extractor which outputs mel-scale frequency cepstral coefficients (MFCC) features followed by a back-end neural network classifier. KWS edge designs aim for the best power-performance-area metrics. This work proposes an area-efficient ultra-low-power time-domain infinite impulse response (IIR) filter-based feature extractor for a KWS system. It uses a serial architecture, and the architecture is further optimized for a low-cost computing structure and mixed-precision bit selection of the IIR coefficients while maintaining good KWS accuracy. Using a 65 nm process technology and a back-end neural network classifier, this simulated feature extractor has an area of 0.02 mm2 and achieves 3.3 μW @ 1.2 V, and achieves 92.5% accuracy on a 10-keyword, 12-class KWS task using the GSCD dataset.

Voice-controlled interfaces on acoustic Internet-of-Things (IoT) sensor nodes and mobile devices require integrated low-power always-on wake-up functions such as Voice Activity Detection (VAD) and Keyword Spotting (KWS) to ensure longer battery life. Most VAD and KWS ICs focused on reducing the power of the feature extractor (FEx) as it is the most power-hungry building block. A serial Fast Fourier Transform (FFT)-based KWS chip [1] achieved 510nW; however, it suffered from a high 64ms latency and was limited to detection of only 1-to-4 keywords (2-to-5 classes). Although the analog FEx [2]-[3] for VAD/KWS reported 0.2W-to-1 W and 10ms-to-100ms latency, neither demonstrated >5 classes in keyword detection. In addition, their voltage-domain implementations cannot benefit from process scaling because the low supply voltage reduces signal swing; and the degradation of intrinsic gain forces transistors to have larger lengths and poor linearity.

This article presents the first keyword spotting (KWS) IC that uses a ring-oscillator-based time-domain processing technique for its analog feature extractor (FEx). Its extensive usage of time-encoding schemes allows the analog audio signal to be processed in a fully time-domain manner except for the voltage-to-time conversion stage of the analog front end. Benefiting from fundamental building blocks based on digital logic gates, it offers better technology scalability compared to conventional voltage-domain designs. Fabricated in a 65-nm CMOS process, the prototyped KWS IC occupies 2.03 mm 2 and dissipates 23- $\mu \text{W}$ power consumption, including analog FEx and digital neural network classifier. The 16-channel time-domain FEx achieves a 54.89-dB dynamic range for 16-ms frame shift size while consuming 9.3 $\mu \text{W}$. The measurement result verifies that the proposed IC performs a 12-class KWS task on the Google Speech Command dataset (GSCD) with >86% accuracy and 12.4-ms latency.