District-scale energy demand models are powerful tools to understand complex urban areas, however these models generally use average weather data from rural locations, thus overlooking the effects of the urban context on the local climate. In order to analyze the effects of urban microclimate on space cooling demand, this paper uses microclimate simulation results from ENVI-met as inputs to a district-scale energy demand model, the City Energy Analyst (CEA), to assess the performance of a proposed masterplan for a new residential district in Almere, the Netherlands.@en

A novel approach is presented to 3D print vacuum–tight polymer components using liquid crystal polymers (LCPs). Vacuum–tight components are essential for gas storage and passive heat transfer, but traditional polymer 3D printing methods often suffer from poor interfaces between layers and high free volume, compromising vacuum integrity. By harnessing the unique properties of LCPs, including low free volume and low melt viscosity, highly ordered domains are achieved through nematic alignment of polymer chains. Critical gas–barrier properties are demonstrated, even in thin, single–print line–walled samples ranging from 0.8 to 1.6 mm. A 200 mm evacuated thermosiphon is successfully printed, which exhibits a thermal resistance of up to 2.18 K/W and an effective thermal conductivity of up to 28 W/mK at 60 °C. These values represent a significant increase compared to the base LCP material. Furthermore, the geometric freedom, enabled by 3D printing through the fabrication of complex–shaped thermosiphons, is showcased. The authors study highlights the potential of LCPs as high–performance materials for 3D printing vacuum–tight components with intricate geometries, opening new avenues for functional design. An application of integrating 3D printed thermosiphons as selective heat transfer components in building envelopes is presented, contributing to greenhouse gas emissions mitigation in the construction sector.@en

Rapid urbanization and densification processes are changing microclimatic environments in cities around the world. Even though previous studies have demonstrated the impact of urban microclimate on space cooling and heating demand, modeling tools employed to support the design process largely overlook microclimatic conditions in assessing building energy performance, making use of data from weather stations often located in rural areas. This paper presents a computational approach for the quantitative analysis of building energy demand at the district scale, including interdependent factors such as local air temperature, relative humidity and wind speed, diversity in building geometry and materials. The method, which couples the microclimate model ENVI-met and the district-scale energy simulation tool City Energy Analyst, is applied to a case study in Zurich, Switzerland, in order to analyze the energy performance of the area on a hot summer day. The study contributes to advance a coupling approach between a microclimate simulation and an energy tool at the district scale. The results showed that the coupled assessment approach can deal with complex interactions between geometry, building materials and energy systems. The consideration of local microclimatic conditions led to a 5% increase in the space cooling demand on the selected day, while the simulated peak cooling load for each building was 8% higher on average. The variation in the space cooling demand was found to be mainly due to an increase in latent cooling demand. Moreover, the coupling method allowed a detailed analysis of energy demand variation at the building level showing that, when considering the local climate patterns, the space cooling demand of the individual buildings varied between −5% and +14% on the selected day. The proposed method represents a next step to reflect the mutual interactions between buildings and microclimate in urban districts and aims at supporting decision-making in the design process.@en

Dynamic building facades offer untapped potential for reducing building energy consumption and emissions. However, there is currently a lack of suitable technologies for bespoke components for new and retrofit applications. In previous work, we developed a 3D printed polymer facade component that selectively acts as a thermal conductor or insulator depending on outdoor and indoor conditions. Our experiments demonstrate that the element can achieve effective thermal conductivities as low as 0.03 W/mK and as high as 28 W/mK in insulating and conducting modes. In this work, we assess the potential impact of this technology on reducing heating and cooling energy demand. We conducted a parametric analysis of ten physical characteristics of the facade component. Then, we simulated the façade component employed in 270 building typologies and climate combinations. Our results indicate annual energy reduction of up to 80 kWh/m2 (heating) and 15 kWh/m2 (cooling) for building typology-climate combinations that can benefit the most from this technology.@en