Influence of Hammer Design on Pile Driving Noise

The Sound of Impact

Master Thesis (2026)
Author(s)

K.S. Broersma (TU Delft - Mechanical Engineering)

Contributor(s)

J. Jovanova – Mentor (TU Delft - Mechanical Engineering)

Andrei Faragau – Graduation committee member (TU Delft - Civil Engineering & Geosciences)

Ike van Giffen – Mentor (Boskalis)

Rutger Voeten – Mentor (Boskalis)

Josué Labaki – Graduation committee member (University of Campinas)

Faculty
Mechanical Engineering
More Info
expand_more
Publication Year
2026
Language
English
Graduation Date
30-11-2026
Awarding Institution
Delft University of Technology
Programme
Mechanical Engineering, Multi-Machine Engineering
Faculty
Mechanical Engineering
Page Views
2
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

Underwater noise from monopile impact driving can harm marine mammals and is restricted in several European countries. Changing the hammer blow can reduce this noise at its source. Near-field models can predict this noise, but they often prescribe the pile-head force or represent the hammer by lumped masses. They thus leave out the stress waves in the ram and the anvil that shape this force. This thesis examines how the hammer design influences the underwater noise, while accounting for the hammer efficiency: the fraction of the impact energy delivered to the pile.

A transient, axisymmetric finite element model coupled the deformable ram and anvil of an IHC S-4000 hammer to the pile and the water. The pile-head force therefore followed from contact. The model was verified and benchmarked against GRLWEAP and scaling laws, but not validated against measurements. The results are relative comparisons of single blows for one pile. Thirty variations of the ram, the anvil and their coupling, including simplified models of the MENCK Noise Reduction Unit (MNRU) and IQIP's PULSE, were compared at equal impact energy. Each variation was evaluated by its hammer efficiency, the fraction of the pile energy that entered the water and the depth-averaged sound exposure level (SEL) at 10 m from the pile axis. These quantities show whether a variation changes the noise through the energy delivered to the pile or through the fraction entering the water.

Doubling the ram length lowered the SEL by 4.9 dB at almost unchanged hammer efficiency. Shifting cross-sectional area from the impact end to the top of the ram lowered the SEL by 5.0 dB, although more energy entered the pile. The fraction of that energy that entered the water decreased by almost a factor of four. The doubled-length ram achieved a similar reduction to the MNRU model, without its loss of hammer efficiency but with twice the ram mass. The PULSE model gave a larger reduction, whose size depends on an uncalibrated chamber stiffness. Differences in underwater sound exposure were largely explained by the pile-head force spectrum. A more gradual force puts less of its spectrum where the pile radiates most strongly. The hammer design therefore changes the noise mainly through how gradually the pile-head force develops. The noise of a design is thus better assessed from its force spectrum than from its hammer efficiency. Future work should measure the differences between configurations and compare them at equal penetration per blow.

Files

License info not available
warning

File under embargo until 20-11-2028