Comparative Analysis of Floc Measurement Setups for Characterising Settling Velocities and Size Distributions
W. Ali (Environmental Fluid Mechanics)
A. Kiricheck (TU Delft - Rivers, Ports, Waterways and Dredging Engineering)
Andrew J. Manning (Plymouth University, HR Wallingford)
C. Chassagne (Environmental Fluid Mechanics)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
Floc size distribution and settling velocities are crucial parameters for characterising cohesive sediments, as they influence how these sediments behave in various environmental settings. The accurate measurement of these properties is essential, with different methods available depending on the scope of the study. For long-term monitoring, in situ techniques based on laser diffraction are commonly used, while video microscopy techniques are preferred for shorter studies due to their ability to provide detailed information on individual particles. This study compares two high-magnification digital video camera setups, LabSFLOC-2 and FLOCCAM, to investigate the impact of particle concentration on settling velocity in flocculated sediments. Flocculated clay was introduced into settling columns, where both the size and settling velocities of the flocs were measured. The results obtained from both setups are in line with each other, even though the FLOCCAM was slightly more efficient at capturing images of small particles (of size less than 50 microns) and LabsFLOC-2 was better at detecting large size fraction particles (having a low contrast due to the presence of organic matter). Floc size and settling velocity measurements from both setups however exhibit mostly similar trends as a function of clay concentration and the same order of magnitudes for the recorded settling velocities.
help_outline