Uchimizu: A Cool(ing) Tradition to Locally Decrease Air Temperature

Journal Article (2018)
Author(s)

Anna Solcerova (TU Delft - Civil Engineering & Geosciences)

Tim van Emmerik (TU Delft - Civil Engineering & Geosciences)

Koen Hilgersom (TU Delft - Civil Engineering & Geosciences)

Frans van de Ven (Deltares, TU Delft - Civil Engineering & Geosciences)

Nick van de Giesen (TU Delft - Civil Engineering & Geosciences)

Research Group
Water Resources
DOI related publication
https://doi.org/10.3390/w10060741 Final published version
More Info
expand_more
Publication Year
2018
Language
English
Research Group
Water Resources
Issue number
6
Volume number
10
Article number
741
Downloads counter
443
Collections
Institutional Repository
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

The urban heat island effect was first described 200 years ago, but the development of ways to mitigate heat in urban areas reaches much further into the past. Uchimizu is a 17th century Japanese tradition, in which water is sprinkled around houses to cool the ground surface and air by evaporation. Unfortunately, the number of published studies that have quantified the cooling effects of uchimizu are limited and only use surface temperature or air temperature at a single height as a measure of the cooling effect. In this research, a dense three-dimensional Distributed Temperature Sensing (DTS) setup was used to measure air temperature with high spatial and temporal resolution within one cubic meter of air above an urban surface. Six experiments were performed to systematically study the effects of (1) the amount of applied water; (2) the initial surface temperature; and (3) shading on the cooling effect of uchimizu. The measurements showed a decrease in air temperature of up to 1.5 ◦C at a height of 2 m, and up to 6 ◦C for near-ground temperature. The strongest cooling was measured in the shade experiment. For water applied in quantities of 1 mm and 2 mm, there was no clear difference in cooling effect, but after application of a large amount of water (>5 mm), the strong near-ground cooling effect was approximately twice as high as when only 1 mm of water was applied. The dense measurement grid used in this research also enabled us to detect the rising turbulent eddies created by the heated surface.