Railway wheel defect identification using the signals reconstructed from impact load data

Abstract (2017)

Authors

A. Alemi Transport Engineering and Logistics - Mechanical, Maritime and Materials Engineering
Y. Pang Transport Engineering and Logistics - Mechanical, Maritime and Materials Engineering
F. Corman Transport Engineering and Logistics - Mechanical, Maritime and Materials Engineering
G. Lodewijks Transport Engineering and Logistics - Mechanical, Maritime and Materials Engineering
Research Group
Transport Engineering and Logistics (Mechanical, Maritime and Materials Engineering) (TU Delft)
More Info
expand_more

Published Date

2017

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Mechanical, Maritime and Materials Engineering

Department

Marine and Transport Technology

Research Group

Transport Engineering and Logistics

Abstract

Wheel Impact Load Detectors are common devices that measure the rail response made by the wheel-rail contact to estimate the condition of the in-service wheels. The data collected by the multiple sensors can be fused to reconstruct a wheel-rail contact pattern over the circumferential coordinate that provides some description of the wheel condition. Moving of a defective wheel with different velocities and axle loads influence the wheel-rail interaction and the pattern reconstructed. As a result, there is a range of variation in the pattern reconstructed for each defect. Therefore, this paper aims to tackle this challenge and to classify the railway wheel defects using pattern recognition tools. Due to the lack of real data, ADAMS/Rail is used to model the wheel-rail contact and to simulate the data collected by the sensors. Then, based on the fusion algorithm, the condition state signals are reconstructed for different wheel defects with different velocities, and axle loads. Then a dataset based on these patterns is generated that is used for training, and testing the classifiers. In this paper, the magnitude of the signal is directly used as the features. The results of the classification show that the wheel defects including a minor defect can be correctly classified with zero error.