Three-dimensional anisotropic modelling of magnetotelluric data to determine the boundary between cap rock and reservoir formation

Abstract

Reservoirs of interest for resource exploration, including geothermal and hydrocarbon reservoirs, commonly have an impermeable cap, which traps fluids below. Identifying this boundary is important for resource development. The cap rock for hydrocarbon reservoirs in southwest Iran contains evaporites and thus some geophysical exploration methods, specifically seismic reflection, have faced problems recovering subsurface information in this environment. As an alternative, we generate an electrical resistivity model from magnetotelluric (MT) data. Furthermore, we consider three-dimensional triaxial electrical anisotropy, which is rarely done. The study objectives are to a) define and map the boundary between the cap rock and the principal reservoir, b) characterize geological and tectonic formations in the area, and c) analyze the tectonic factors influencing the evolution of the region. A total of 359 MT measurements were acquired across the Sarab field in an array consisting of five profiles separated by >2000 m with a measurement spacing of >200 m. Transient electromagnetic (TEM) measurements were co-located with the MT measurements at 181 locations and used to correct for static shifts. Isotropic and anisotropic inversions of the MT data were performed, using all impedance tensor elements. The anisotropic electrical resistivity model exhibits both a significantly better alignment with the depths of geological formations known from drilling data and a better fit to the data. Therefore, the boundary between the primary cap rock and principal reservoir, the Gachsaran and Asmari formations, is defined and mapped across the survey area. In addition, major tectonic and fault-related features in the region are identified.