New support structures for reduced overheating on downfacing regions of direct metal printed parts
Umberto Paggi (3D Systems Leuven, Katholieke Universiteit Leuven)
Rajit Ranjan (TU Delft - Computational Design and Mechanics)
Lore Thijs (3D Systems Leuven)
C. Ayas (TU Delft - Computational Design and Mechanics)
M Langelaar (TU Delft - Computational Design and Mechanics)
F. van Van Keulen (TU Delft - Computational Design and Mechanics)
Brecht van Hooreweder (Katholieke Universiteit Leuven)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
In Laser Powder Bed Fusion (LPBF), the downfacing surfaces usually have increased surface roughness and reduced dimensional accuracy due to local overheating and warpage. To partially overcome this a new supporting structure is developed in this study, namely the contactless support. This is a thin blade parallel to the critical area which transfer the heat away from the melt pool via conduction through the powder bed instead of direct contact. The support is tested in different geometries and printing conditions to define the optimal distance from the part and its effectiveness is evaluated by measuring the surface roughness of the samples. Numerical modelling of heat transfer phenomenon is also employed to determine the thermal history of the printing process and understand which parameters define the optimal distance for the thermal supports. Finally topology optimization is used to create a support structure which minimize the wasted material while keeping the heat flow optimal.