Estimating Ship Structural Response Using Sparse Sensor Measurements

Transient (Slamming) Effects

Master Thesis (2026)
Author(s)

A.C. Gaard (TU Delft - Mechanical Engineering)

Contributor(s)

J.H. den Besten – Mentor (TU Delft - Mechanical Engineering)

A. Grammatikopoulos – Graduation committee member (TU Delft - Mechanical Engineering)

P.R. Wellens – Graduation committee member (TU Delft - Mechanical Engineering)

N. Yue – Graduation committee member (TU Delft - Aerospace Engineering)

R.L.G. Slange – Mentor (TU Delft - Mechanical Engineering)

Gabriele Bufalari – Mentor (Damen Naval)

Robin van Dijke – Graduation committee member (Damen Naval)

Faculty
Mechanical Engineering
More Info
expand_more
Publication Year
2026
Language
English
Graduation Date
26-11-2026
Awarding Institution
Delft University of Technology
Programme
Offshore & Dredging Engineering
Sponsors
Damen Naval
Faculty
Mechanical Engineering
Page Views
3
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

Slamming can accelerate fatigue damage accumulation in ship structures, but the developing cracks are not always easily detectable. Sparse sensor measurements can be used to estimate the structural response of ships, perform a fatigue assessment, and identify areas requiring preventive maintenance. To estimate irregular linear wave loading and response, measured strains are often multiplied by an inverted modal basis, resulting in a set of amplitude estimates that scales the external loading and structural response at all finite elements. The modal basis itself is commonly constructed as a set of particular solutions to the frequency domain equation of motion (distortion modes), but higher-order vibrations are excited by slamming loads and are best represented by the homogeneous solution (wet modes). To address global effects, this work proposes a method for estimating the global high-frequency loading and response by means of using wet modes, a truncated set of complex eigenvectors obtained using structural mass, stiffness, damping, and frequency-dependent radiation coefficients. To address local hydroelastic slamming effects, this work proposes a method for estimating the local high-frequency response by means of using dry modes, a truncated set of real eigenvectors obtained using structural mass and stiffness matrices of an orthotropically stiffened panel. The two methods are investigated using one-dimensional finite element models: a scale segmented barge and an orthotropically stiffened plate, which is represented by a beam. Results show that a truncated basis of wet modes accurately estimates high-frequency strains and pressures at unmeasured locations, while low-frequency rigid body motions introduce inestimable effects. The basis of distortion modes is found to introduce significant loading estimation error, despite estimating strains near the measured locations with relatively good accuracy. A truncated basis of dry modes accurately estimates the hydroelastic response of a panel at unmeasured locations. Three sensors and three modes are required in both cases, but separation of high- and low-frequency measurements by means of a discrete filter is required for accurate high-frequency estimates in the global model. Models are verified against analytical, numerical, and experimental results from literature.

Files

License info not available