A compatibility study of static balancing in reconfigurable mechanisms

Conference paper (2016)

Authors

P.D. Robertson Student
J.L. Herder Mechatronic Systems Design - Mechanical, Maritime and Materials Engineering
C.H. Kuo National Taiwan University of Science and Technology
Research Group
Mechatronic Systems Design (Mechanical, Maritime and Materials Engineering) (TU Delft)
Topology Rehabilitation devices Springs Mechanical admittance
More Info
expand_more

Published Date

2016

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Mechanical, Maritime and Materials Engineering

Department

Precision and Microsystems Engineering

Research Group

Mechatronic Systems Design

Abstract

Reconfigurable mechanisms are a group of mechanisms that can change their topology or mobility while in operation. This property can add flexibility of the use of the mechanisms in constrained environments. Some situations require these mechanisms to be statically balanced. One example is a statically balanced lower-limb rehabilitation device, allowing patients who suffer from lower-limb paralysis to exercise without the need for a therapist to guide them. This mechanism by Tseng et al. [1] is one of the very few examples of a statically balanced reconfigurable mechanism. From literature it is known that there is no general way to statically balance these mechanisms. This paper aims to create an overview of the methods that can be applied by making a classification of reconfigurable mechanisms based on the intrinsic properties, then reviewing each group of this overview to find a generalised static balancing method. Only two mechanism groups show high compatibility with static balancing. One of these groups could be balanced using a single spring. The other shows the property that if one operation mode is balanced, no additional springs are needed for the other mode. Applying these techniques could reduce the overall complexity of the mechanism.